RAM COOLER_nbsp_4 inkl. 4 RAM Module Nickel POM Black_nbsp_without Fittings
Limited Nickel POM black Edition !!!
This RAM COOLER_nbsp_4_nbsp_was_nbsp_developed_nbsp_to take up to_nbsp_4 Memory Modules without Heatspreaders no matter if you use
DDR2 or DDR3 double sided Modules. This RAM COOLER_nbsp_4 comes with_nbsp_4 RAM Modules so you could make a full RAM Setup to your Mainboard.
If you use single sided Modules, you must fill up the enpty side of the modules with a thermalpad which you could also order here.
The main Advantages of our RAM COOLERs are:
_nbsp__nbsp_ - absolut stable Operation of your RAM Modules because they get not so hot, as aircooled
_nbsp__nbsp_ - longer Life of your RAM Modules, because they get not so hot as when aircooled
_nbsp__nbsp_ - more OC Potential of your RAM Modules because they run not so hot as when aircooled
_nbsp__nbsp_ - more VDIMM possible as when your RAM is only aircooled
The_nbsp_RAM COOLER_nbsp_is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.
For easy mounting, appropriate_nbsp_nuts and washers_nbsp_included. _nbsp_ The cooler has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.
IMPORTANT: The deinstallation of the stock_nbsp_Heatspraders may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.
CAUTION: The RAM Modules are adjustable in a range from 8-10mm between your Mainboards RAM Slots, so you could use this RAM COOLER also on Mainboards with close Space between the RAM Slots. The maximal Distance from 1st RAM Slot to 4th RAM Slot is 40mm !!!
MOUNTING:
_nbsp__nbsp_ 1. Loosen (not complete unscrew) _nbsp_the 3 screws from our RAM Module
_nbsp__nbsp_ 2. Put some thermal paste on your ram chips or a thermal pad (better for later RMA)
_nbsp__nbsp_ 3. Insert the prepared RAM into the RAM Module and press the two ALU halves together by screwing the 3 screws firmly
_nbsp__nbsp_ 4. Check the sitting of your_nbsp_RAM if both ALU Plates have contact with all the RAM Chips.
_nbsp__nbsp_ 5. Repeat this for all your RAM Modules.
_nbsp__nbsp_ 6. Put in your prepared RAM Modules into the RAM Slots of your Mainboard.
_nbsp__nbsp_ 7. put a little of thermal grease on the Top of the RAM Modules an screw all Modules with the copper Cooling Plate.
_nbsp__nbsp_ 8._nbsp_Mount your Fittings and make your Tubing, ready !!!_nbsp__nbsp_
Technical data:
Size_nbsp_Alu RAM Module: 139 x 40mm_nbsp_Overall Size RAM COOLER_nbsp_3 without Fittings: 139 x_nbsp_48 x 15mm (L x B x H) Weight: ~504g RAM Modules: Aluminium 2mmCooling Plate:_nbsp_Nickel Coatet Pure Copper_nbsp_3mmCover Plate: POM schwarz 6mmFitting Plate: POM schwarz 6mmConnection Threads: G1/4´´Flow cross section: 10,5 x 4 mm=42mm²
_nbsp_Our COOLERs are always delivered without fittings !!!
Manufacturer: MIPS Computer GmbH
RAM COOLER_nbsp_5 inkl._nbsp_3 RAM Module Nickel POM Black_nbsp_without Fittings
This RAM COOLER_nbsp_5_nbsp_was_nbsp_developed_nbsp_to take up to_nbsp_3 or 6 _nbsp_DDR3 Memory Modules without Heatspreaders developed for all the new X58 Mainboards.
_nbsp_The RAM COOLER 5 comes with 3 RAM Modules included, if you want to cool down 6 Modules you should order 3 extra RAM Modules here in the shop order Number MCH242 !!!
CAUTION: The RAM Modules are adjustable in a range from 8-10mm between your Mainboards RAM Slots, so you could use this RAM COOLER also on Mainboards with close Space between the RAM Slots. The maximal Distance from 1st RAM Slot to 4th RAM Slot is 52mm !!!
Size_nbsp_Alu RAM Module: 139 x 40mm_nbsp_Overall Size RAM COOLER_nbsp_5 without Fittings: 139 x_nbsp_58,5 x 16mm (L x B x H) Weight: ~524g RAM Modules: Aluminium 2mmCooling Plate:_nbsp_Nickel Coatet Pure Copper_nbsp_3mmCover Plate: POM_nbsp_black 6mmFitting Plate: POM_nbsp_black 6mmConnection Threads: G1/4´´Flow cross section: 10,5 x 4 mm=42mm²
RAM COOLER 6 ´Corsair / Mushkin Edition´ Nickel POM Black_nbsp_without Fittings
This RAM COOLER_nbsp_6_nbsp_was_nbsp_developed_nbsp_to take up to_nbsp_6 Corsair XMS3 Dominator Series RAM with passive Heatsink on the Top of the RAM screwed with 3 black Screws.
_nbsp__nbsp_ 1._nbsp_complete unscrew the 3 screws from_nbsp_Corsair RAM Module and remove passive Heatsink.
_nbsp__nbsp_ 2._nbsp_screw the Corsair RAM Module on our RAM COOLER 6 _ez_Cosair Edition_ez_, thats all !!!
_nbsp__nbsp_ Technical data:
Overall Size RAM COOLER_nbsp_6 without Fittings: 127 x_nbsp_58,5 x 15mm (L x B x H) Weight: ~400g Cooling Plate:_nbsp_Nickel Coatet Pure Copper 3mmCover Plate: POM_nbsp_black 6mmFitting Plate: POM_nbsp_black 6mmConnection Threads: G1/4´´Flow cross section: 10,5 x 4 mm=42mm²
RAM COOLER_nbsp_7 ´Corsair / Mushkin Edition´ Nickel POM Black_nbsp_without Fittings
This RAM COOLER_nbsp_7_nbsp_was_nbsp_developed_nbsp_for actual AM3 Mainoards to take up to_nbsp_4 Corsair XMS3 Dominator Series or Mushkin Copperhead Series_nbsp_RAM with passive Heatsink on the Top of the RAM screwed with 3 black Screws (Corsair).
The Cooler has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.
_nbsp__nbsp_ 2._nbsp_screw the Corsair or Mushkin RAM Module on our RAM COOLER_nbsp_7, thats all !!!
Overall Size_nbsp_without Fittings: 127 x_nbsp_48 x 15mm (L x B x H) Weight: ~360g Cooling Plate:_nbsp_Nickel Coatet Pure Copper 3mmCover Plate: POM_nbsp_black 6mmFitting Plate: POM_nbsp_black 6mmConnection Threads: G1/4´´Flow cross section: 10,5 x 4 mm=42mm²