MIPS Productline RAM Cooler Copper Pom Black

RAM COOLER 2 inkl. 1 RAM Modul POM Black_nbsp_without Fittings

This RAM COOLER_nbsp_2_nbsp_was_nbsp_developed_nbsp_to take up to 3 Memory Modules without Heatspreaders no matter if you use

DDR1 / DDR2 or DDR3 double sided Modules. This RAM COOLER 2 comes with 1 RAM Module, if you need more RAM modules you should order them seperatly here in the shop (order Nr._nbsp_MCH242) !!

If you use single sided Modules, you must fill up the enpty side of the modules with a thermalpad which you could also order here.

The main Advantages of our RAM COOLERs are:

_nbsp__nbsp_ - absolut stable Operation of your RAM Modules because they get not so hot, as aircooled

_nbsp__nbsp_ - longer Life of your RAM Modules, because they get not so hot as when aircooled

_nbsp__nbsp_ - more OC Potential of your RAM Modules because they run not so hot as when aircooled

_nbsp__nbsp_ - more VDIMM possible as when your RAM is only aircooled

The_nbsp_RAM COOLER_nbsp_is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate_nbsp_nuts and washers_nbsp_included. _nbsp_
The cooler has 1 / 4_ez__ez_thread and can be used with all possible connection types are combined.

IMPORTANT: The deinstallation of the stock_nbsp_Heatspraders may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

CAUTION: The RAM Modules are adjustable in a range from 8-10mm between your Mainboards RAM Slots, so you could use this RAM COOLER also on Mainboards with close Space between the RAM Slots. The maximal Distance from 1st RAM Slot to 3rd RAM Slot is 18mm !!!

MOUNTING:

_nbsp__nbsp_ 1. Loosen (not complete unscrew) _nbsp_the 3 screws from our RAM Module

_nbsp__nbsp_ 2. Put some thermal paste on your ram chips or a thermal pad (better for later RMA)

_nbsp__nbsp_ 3. Insert the prepared RAM into the RAM Module and press the two ALU halves together by screwing the 3 screws firmly

_nbsp__nbsp_ 4. Check the sitting of your_nbsp_RAM if both ALU Plates have contact with all the RAM Chips.

_nbsp__nbsp_ 5. Repeat this for all your RAM Modules.

_nbsp__nbsp_ 6. Put in your prepared RAM Modules into the RAM Slots of your Mainboard.

_nbsp__nbsp_ 7. put a little of thermal grease on the Top of the RAM Modules an screw all Modules with the copper Cooling Plate.

_nbsp__nbsp_ 8._nbsp_Mount your Fittings and make your Tubing, ready !!!_nbsp__nbsp_

Technical data:

Size_nbsp_Alu RAM Module: 124 x 30mm_nbsp_
Overall Size RAM COOLER 2 without Fittings: 139 x 25 x 51mm (L x B x H)
Weight: ~200g
RAM Modules: Aluminium 2mm
Cooling Plate:_nbsp_Pure Copper_nbsp_3mm
Cover Plate: POM schwarz 6mm
Fitting Plate: POM schwarz 6mm
Connection Threads: G1/4´´
Flow cross section: 10,5 x 4 mm=42mm²

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

RAM COOLER 3 inkl. 4 RAM Module POM Black_nbsp_without Fittings

This RAM COOLER_nbsp_3_nbsp_was_nbsp_developed_nbsp_to take up to_nbsp_4 Memory Modules without Heatspreaders no matter if you use

DDR1 / DDR2 or DDR3 double sided Modules. This RAM COOLER_nbsp_3 comes with_nbsp_4 RAM Modules so you could make a full RAM Setup to your Mainboard.

If you use single sided Modules, you must fill up the enpty side of the modules with a thermalpad which you could also order here.

The main Advantages of our RAM COOLERs are:

_nbsp__nbsp_ - absolut stable Operation of your RAM Modules because they get not so hot, as aircooled

_nbsp__nbsp_ - longer Life of your RAM Modules, because they get not so hot as when aircooled

_nbsp__nbsp_ - more OC Potential of your RAM Modules because they run not so hot as when aircooled

_nbsp__nbsp_ - more VDIMM possible as when your RAM is only aircooled

The_nbsp_RAM COOLER_nbsp_is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate_nbsp_nuts and washers_nbsp_included. _nbsp_
The cooler has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

IMPORTANT: The deinstallation of the stock_nbsp_Heatspraders may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

CAUTION: The RAM Modules are adjustable in a range from 8-10mm between your Mainboards RAM Slots, so you could use this RAM COOLER also on Mainboards with close Space between the RAM Slots. The maximal Distance from 1st RAM Slot to 4th RAM Slot is 32mm !!!

MOUNTING:

_nbsp__nbsp_ 1. Loosen (not complete unscrew) _nbsp_the 3 screws from our RAM Module

_nbsp__nbsp_ 2. Put some thermal paste on your ram chips or use a thermal pad (order nr. mch253)_nbsp_

_nbsp__nbsp_ 3. Insert the prepared RAM into the RAM Module and press the two ALU halves together by screwing the 3 screws firmly

_nbsp__nbsp_ 4. Check the sitting of your_nbsp_RAM if both ALU Plates have contact with all the RAM Chips.

_nbsp__nbsp_ 5. Repeat this for all your RAM Modules.

_nbsp__nbsp_ 6. Put in your prepared RAM Modules into the RAM Slots of your Mainboard.

_nbsp__nbsp_ 7. put a little of thermal grease on the Top of the RAM Modules an screw all Modules with the copper Cooling Plate.

_nbsp__nbsp_ 8._nbsp_Mount your Fittings and make your Tubing, ready !!!_nbsp__nbsp_

Technical data:

Size_nbsp_Alu RAM Module: 139 x 40mm_nbsp_
Overall Size RAM COOLER 2 without Fittings: 139 x_nbsp_40 x 16mm (L x B x H)
Weight: ~450g
RAM Modules: Aluminium 2mm
Cooling Plate:_nbsp_Pure Copper_nbsp_3mm
Cover Plate: POM schwarz 6mm
Fitting Plate: POM schwarz 6mm
Connection Threads: G1/4´´
Flow cross section: 10,5 x 4 mm=42mm²

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

RAM COOLER_nbsp_4 inkl. 4 RAM Module POM Black_nbsp_without Fittings

This RAM COOLER_nbsp_4_nbsp_was_nbsp_developed_nbsp_to take up to_nbsp_4 Memory Modules without Heatspreaders no matter if you use

DDR1 / DDR2 or DDR3 double sided Modules. This RAM COOLER_nbsp_4 comes with_nbsp_4 RAM Modules so you could make a full RAM Setup to your Mainboard.

If you use single sided Modules, you must fill up the enpty side of the modules with a thermalpad which you could also order here.

The main Advantages of our RAM COOLERs are:

_nbsp__nbsp_ - absolut stable Operation of your RAM Modules because they get not so hot, as aircooled

_nbsp__nbsp_ - longer Life of your RAM Modules, because they get not so hot as when aircooled

_nbsp__nbsp_ - more OC Potential of your RAM Modules because they run not so hot as when aircooled

_nbsp__nbsp_ - more VDIMM possible as when your RAM is only aircooled

The_nbsp_RAM COOLER_nbsp_is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate_nbsp_nuts and washers_nbsp_included. _nbsp_
The cooler has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

IMPORTANT: The deinstallation of the stock_nbsp_Heatspraders may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

CAUTION: The RAM Modules are adjustable in a range from 8-10mm between your Mainboards RAM Slots, so you could use this RAM COOLER also on Mainboards with close Space between the RAM Slots. The maximal Distance from 1st RAM Slot to 4th RAM Slot is 40mm !!!

MOUNTING:

_nbsp__nbsp_ 1. Loosen (not complete unscrew) _nbsp_the 3 screws from our RAM Module

_nbsp__nbsp_ 2. Put some thermal paste on your ram chips or a thermal pad (better for later RMA)

_nbsp__nbsp_ 3. Insert the prepared RAM into the RAM Module and press the two ALU halves together by screwing the 3 screws firmly

_nbsp__nbsp_ 4. Check the sitting of your_nbsp_RAM if both ALU Plates have contact with all the RAM Chips.

_nbsp__nbsp_ 5. Repeat this for all your RAM Modules.

_nbsp__nbsp_ 6. Put in your prepared RAM Modules into the RAM Slots of your Mainboard.

_nbsp__nbsp_ 7. put a little of thermal grease on the Top of the RAM Modules an screw all Modules with the copper Cooling Plate.

_nbsp__nbsp_ 8._nbsp_Mount your Fittings and make your Tubing, ready !!!_nbsp__nbsp_

Technical data:

Size_nbsp_Alu RAM Module: 139 x 40mm_nbsp_
Overall Size RAM COOLER_nbsp_3 without Fittings: 139 x_nbsp_40 x 15mm (L x B x H)
Weight: ~504g
RAM Modules: Aluminium 2mm
Cooling Plate:_nbsp_Pure Copper_nbsp_3mm
Cover Plate: POM schwarz 6mm
Fitting Plate: POM schwarz 6mm
Connection Threads: G1/4´´
Flow cross section: 10,5 x 4 mm=42mm²

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

RAM COOLER_nbsp_5 inkl._nbsp_3 RAM Module POM Black_nbsp_without Fittings

This RAM COOLER_nbsp_5_nbsp_was_nbsp_developed_nbsp_to take up to_nbsp_3 or 6 _nbsp_DDR3 Memory Modules without Heatspreaders developed for all the new X58 Mainboards.

_nbsp_The RAM COOLER 5 comes with 3 RAM Modules included, if you want to cool down 6 Modules you should order 3 extra RAM Modules here in the shop order Number MCH242 !!!

If you use single sided Modules, you must fill up the enpty side of the modules with a thermalpad which you could also order here.

The main Advantages of our RAM COOLERs are:

_nbsp__nbsp_ - absolut stable Operation of your RAM Modules because they get not so hot, as aircooled

_nbsp__nbsp_ - longer Life of your RAM Modules, because they get not so hot as when aircooled

_nbsp__nbsp_ - more OC Potential of your RAM Modules because they run not so hot as when aircooled

_nbsp__nbsp_ - more VDIMM possible as when your RAM is only aircooled

The_nbsp_RAM COOLER_nbsp_is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate_nbsp_nuts and washers_nbsp_included. _nbsp_
The cooler has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

IMPORTANT: The deinstallation of the stock_nbsp_Heatspraders may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

CAUTION: The RAM Modules are adjustable in a range from 8-10mm between your Mainboards RAM Slots, so you could use this RAM COOLER also on Mainboards with close Space between the RAM Slots. The maximal Distance from 1st RAM Slot to 4th RAM Slot is 52mm !!!

MOUNTING:

_nbsp__nbsp_ 1. Loosen (not complete unscrew) _nbsp_the 3 screws from our RAM Module

_nbsp__nbsp_ 2. Put some thermal paste on your ram chips or a thermal pad (better for later RMA)

_nbsp__nbsp_ 3. Insert the prepared RAM into the RAM Module and press the two ALU halves together by screwing the 3 screws firmly

_nbsp__nbsp_ 4. Check the sitting of your_nbsp_RAM if both ALU Plates have contact with all the RAM Chips.

_nbsp__nbsp_ 5. Repeat this for all your RAM Modules.

_nbsp__nbsp_ 6. Put in your prepared RAM Modules into the RAM Slots of your Mainboard.

_nbsp__nbsp_ 7. put a little of thermal grease on the Top of the RAM Modules an screw all Modules with the copper Cooling Plate.

_nbsp__nbsp_ 8._nbsp_Mount your Fittings and make your Tubing, ready !!!_nbsp__nbsp_

Technical data:

Size_nbsp_Alu RAM Module: 139 x 40mm_nbsp_
Overall Size RAM COOLER_nbsp_5 without Fittings: 139 x_nbsp_58,5 x 16mm (L x B x H)
Weight: ~524g
RAM Modules: Aluminium 2mm
Cooling Plate:_nbsp_Pure Copper_nbsp_3mm
Cover Plate: POM_nbsp_black 6mm
Fitting Plate: POM_nbsp_black 6mm
Connection Threads: G1/4´´
Flow cross section: 10,5 x 4 mm=42mm²

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

RAM COOLER 6 ´Corsair Edition´ POM Black_nbsp_without Fittings

This RAM COOLER_nbsp_6_nbsp_was_nbsp_developed_nbsp_to take up to_nbsp_6 Corsair XMS3 Dominator Series RAM with passive Heatsink on the Top of the RAM screwed with 3 black Screws.

The main Advantages of our RAM COOLERs are:

_nbsp__nbsp_ - absolut stable Operation of your RAM Modules because they get not so hot, as aircooled

_nbsp__nbsp_ - longer Life of your RAM Modules, because they get not so hot as when aircooled

_nbsp__nbsp_ - more OC Potential of your RAM Modules because they run not so hot as when aircooled

_nbsp__nbsp_ - more VDIMM possible as when your RAM is only aircooled

The_nbsp_RAM COOLER_nbsp_is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate_nbsp_nuts and washers_nbsp_included. _nbsp_
The cooler has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

MOUNTING:

_nbsp__nbsp_ 1._nbsp_complete unscrew the 3 screws from_nbsp_Corsair RAM Module and remove passive Heatsink.

_nbsp__nbsp_ 2._nbsp_screw the Corsair RAM Module on our RAM COOLER 6 _ez_Cosair Edition_ez_, thats all !!!

_nbsp__nbsp_
Technical data:

Overall Size RAM COOLER_nbsp_6 without Fittings: 127 x_nbsp_58,5 x 15mm (L x B x H)
Weight: ~400g
Cooling Plate:_nbsp_Pure Copper_nbsp_3mm
Cover Plate: POM_nbsp_black 6mm
Fitting Plate: POM_nbsp_black 6mm
Connection Threads: G1/4´´
Flow cross section: 10,5 x 4 mm=42mm²

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

RAM COOLER 5 Upgrade Copperplate

With_nbsp_this Copper Plate you could upgrade your existing RAM COOLER 4 to the wider RAM COOLER 5 and could use it togehter with the new X58 based Motherboards using up to 6 Memory Modules !!!

Technical data:

Size_nbsp_Copper Plate: 139 x_nbsp_58,5 x 3mm (L x B x H)
Cooling Plate:_nbsp_Pure Copper_nbsp_3mm

Manufacturer: MIPS ComputerGmbH

RAM COOLER Module 30mm

With_nbsp_this_nbsp_RAM COOLER Modul you could upgrade several RAM COOLERs to the maximum_nbsp_e.g. our RAM COOLER 5 including 3 RAM Modules_nbsp_for_nbsp_X58 based Motherboards using up to 6 Memory Modules !!!

Technical data:

Size_nbsp_Plate: 139 x_nbsp_30mm (L_nbsp_x H)
Cooling Plate:_nbsp_Aluminium_nbsp_2mm

Manufacturer: MIPS ComputerGmbH

RAM COOLER Module 35mm

With_nbsp_this_nbsp_RAM COOLER Modul you could upgrade several RAM COOLERs to the maximum_nbsp_e.g. our RAM COOLER 5 including 3 RAM Modules_nbsp_for_nbsp_X58 based Motherboards using up to 6 Memory Modules !!!

CAUTION: You only need this RAM COOLER Modul for some Corsair RAM Modules with a higher PCB !!!

Technical data:

Size_nbsp_Plate: 139 x_nbsp_35mm (L_nbsp_x H)
Cooling Plate:_nbsp_Aluminium_nbsp_2mm

Manufacturer: MIPS ComputerGmbH

Thermalpad 0,5mm (120x20mm) for MIPS RAM Module

This ultrathin (0,5mm)_nbsp_Thermalpad you could use_nbsp_between your RAM Module and_nbsp_our RAM COOLER Modules for perfect heat transmission. Please notice,_nbsp_that you_nbsp_need 2 Pads for 1 doublesided RAM Module !!!

If you use singlesided RAM Modules you should take one of this ultrathin Thermalpad on the side where the RAM Chips are and on the empty side of your PCB you should use the thicker one part Number MCH354 or MCH355.

Technical data:

Size_nbsp_120 x_nbsp_20 x 0,5mm (L_nbsp_x B x H)_nbsp_
Thermal conductivity > 1,5W/mk, not electrical conductive !!!

Manufacturer: MIPS ComputerGmbH

Thermalpad 1mm (120x20mm) for MIPS RAM Module

If you use singlesided RAM Modules you should take this 1mm Thermalpad_nbsp_on the_nbsp_empty side of your RAM_nbsp_Module and on the other side where the RAM Chips located you should use the ultrathin 0,5mm Thermalpad_nbsp_order-number MCH353 !!!_nbsp_

Technical data:

Size_nbsp_120 x_nbsp_20 x 1mm (L_nbsp_x B x H)_nbsp_
Thermal conductivity > 1,2 W/mk, not electrical conductive !!!

Manufacturer: MIPS ComputerGmbH

Highend Thermalpad 1mm (120x20mm) for MIPS RAM Module

If you use singlesided RAM Modules you should take this 1mm Highend Thermalpad_nbsp_on the_nbsp_empty side of your RAM_nbsp_Module and on the other side where the RAM Chips located you should use the ultrathin 0,5mm Thermalpad_nbsp_order-number MCH353 !!!_nbsp_

Technical data:

Size_nbsp_120 x_nbsp_20 x 1mm (L_nbsp_x B x H)_nbsp_
Thermal conductivity >_nbsp_5 W/mk, not electrical conductive !!!

Manufacturer: MIPS ComputerGmbH