RAM COOLER 2 inkl. 1 RAM Modul Nickel_nbsp_without Fittings
This RAM COOLER_nbsp_2_nbsp_was_nbsp_developed_nbsp_to take up to 3 Memory Modules without Heatspreaders no matter if you use DDR1 / DDR2 or DDR3 double sided Modules. This RAM COOLER 2 comes with 1 RAM Module, if you need more RAM modules you should order them seperatly_nbsp_(order Nr._nbsp_MCH242) !!
If you use single sided Modules, you must fill up the enpty side of the RAM modules with a thermalpad which you could_nbsp_order_nbsp_separatly (order nr. MCH354 or MCH355) !!
The main Advantages of our RAM COOLERs are:
_nbsp__nbsp_ - absolut stable Operation of your RAM Modules because they get not so hot, as aircooled
_nbsp__nbsp_ - longer Life of your RAM Modules, because they get not so hot as when aircooled
_nbsp__nbsp_ - more OC Potential of your RAM Modules because they run not so hot as when aircooled
_nbsp__nbsp_ - more VDIMM possible as when your RAM is only aircooled
The_nbsp_RAM COOLER_nbsp_is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.
For easy mounting, appropriate_nbsp_nuts and_nbsp_bolts_nbsp_included. _nbsp_ The_nbsp_RAM COOLER_nbsp_has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.
IMPORTANT: The deinstallation of the stock_nbsp_Heatspraders may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.
CAUTION: The RAM Modules are adjustable in a range from 8-10mm between your Mainboards RAM Slots, so you could use this RAM COOLER also on Mainboards with close space between the RAM Slots. The maximal Distance from 1st RAM Slot to 3rd RAM Slot is 18mm !!!
MOUNTING:
_nbsp__nbsp_ 1. Loosen (not complete unscrew) _nbsp_the 3 screws from our RAM Module
_nbsp__nbsp_ 2. Put some thermal paste on your ram chips or a thermal pad (better for later RMA)
_nbsp__nbsp_ 3. Insert the prepared RAM into the RAM Module and press the two ALU halves together by screwing the 3 screws firmly
_nbsp__nbsp_ 4. Check the sitting of your_nbsp_RAM if both ALU Plates have contact with all the RAM Chips.
_nbsp__nbsp_ 5. Repeat this for all your RAM Modules.
_nbsp__nbsp_ 6. Put in your prepared RAM Modules into the RAM Slots of your Mainboard.
_nbsp__nbsp_ 7. put a little of thermal grease on the Top of the RAM Modules an screw all Modules with the copper Cooling Plate.
_nbsp__nbsp_ 8._nbsp_Mount your Fittings and make your Tubing, ready !!!_nbsp__nbsp_
Technical data:
Size_nbsp_Alu RAM Module: 124 x 30mm_nbsp_Overall Size RAM COOLER 2 without Fittings: 140 x 25 x 46mm (L x B x H) Weight: ~235g RAM Modules: Aluminium 2mmCooling Plate:_nbsp_Pure Copper_nbsp_3mm Cover Plate:_nbsp_Brass nickel plated 5mm Fitting Plate:_nbsp_Brass nickel plated 10mmConnection Threads: G1/4´´Flow cross section: 10,5 x 4 mm=42mm²
_nbsp_Our COOLERs are always delivered without fittings !!!
Manufacturer: MIPS Computer GmbH
RAM COOLER 3 inkl. 4 RAM Module Nickel_nbsp_without Fittings
This RAM COOLER_nbsp_3_nbsp_was_nbsp_developed_nbsp_to take up to_nbsp_4 Memory Modules without Heatspreaders no matter if you use DDR1 / DDR2 or DDR3 double sided Modules. This RAM COOLER_nbsp_3 comes with_nbsp_4 RAM Modules so you could make a full RAM Setup to your Mainboard.
If you use single sided Modules, you must fill up the enpty side of the RAM modules with a thermalpad which you could order separatly (order nr. MCH354 or MCH355) !!
For easy mounting, appropriate_nbsp_nuts and_nbsp_bolts_nbsp_included. _nbsp_ The cooler has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.
CAUTION: The RAM Modules are adjustable in a range from 8-10mm between your Mainboards RAM Slots, so you could use this RAM COOLER also on Mainboards with close Space between the RAM Slots. The maximal Distance from 1st RAM Slot to 4th RAM Slot is 32mm !!!
_nbsp__nbsp_ 2. Put some thermal paste on your ram chips or_nbsp_use a thermal pad (order nr. mch253)
Size_nbsp_Alu RAM Module: 139 x 40mm_nbsp_Overall Size RAM COOLER 2 without Fittings: 139 x_nbsp_40 x 16mm (L x B x H) Weight: ~450g RAM Modules: Aluminium 2mmCooling Plate:_nbsp_Pure Copper_nbsp_3mmCover Plate:_nbsp_Brass nickel plated 3mmFitting Plate:_nbsp_Brass nickel plated 5mmConnection Threads: G1/4´´
Our COOLERs are always delivered without fittings!!!
RAM COOLER_nbsp_4 inkl. 4 RAM Module_nbsp_Nickel without Fittings
This RAM COOLER_nbsp_4_nbsp_was_nbsp_developed_nbsp_to take up to_nbsp_4 Memory Modules without Heatspreaders no matter if you use_nbsp_DDR2 or DDR3 double sided Modules. This RAM COOLER_nbsp_4 comes with_nbsp_4 RAM Modules so you could make a full RAM Setup to your Mainboard.
If you use single sided Modules, you must fill up the enpty side of the modules with a thermalpad which you could also order separatly (order nr. MCH354 or MCH355) !!
For easy mounting, appropriate_nbsp_nuts and bolts_nbsp_included. _nbsp_ The cooler has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.
CAUTION: The RAM Modules are adjustable in a range from 8-10mm between your Mainboards RAM Slots, so you could use this RAM COOLER also on Mainboards with close Space between the RAM Slots. The maximal Distance from 1st RAM Slot to 4th RAM Slot is 40mm !!!
_nbsp__nbsp_ 2._nbsp_Put some thermal paste on your ram chips or use a thermal pad (order nr. mch253)
Size_nbsp_Alu RAM Module: 139 x 40mm_nbsp_Overall Size RAM COOLER_nbsp_3 without Fittings: 139 x_nbsp_48 x 16mm (L x B x H) Weight: ~500g RAM Modules: Aluminium 2mmCooling Plate:_nbsp_Pure Copper_nbsp_3mmCover Plate:_nbsp_Brass nickel plated 3mmFitting Plate:_nbsp_Brass nickel plated 5mmConnection Threads: G1/4´´
RAM COOLER_nbsp_5 inkl._nbsp_3 RAM Module_nbsp_Nickel without Fittings
This RAM COOLER_nbsp_5_nbsp_was_nbsp_developed_nbsp_to take up to_nbsp_3 or 6 _nbsp_DDR3 Memory Modules without Heatspreaders developed for all the new X58 Mainboards.
The RAM COOLER 5 comes with 3 RAM Modules included, if you want to cool down 6 Modules you should order 3 extra RAM Modules_nbsp_separatly (order nr. MCH242).
If you use single sided Modules, you must fill up the enpty side of the RAM modules with a thermalpad which you could order separatly (order nr. MCH354 or MCH355).
CAUTION: The RAM Modules are adjustable in a range from 8-10mm between your Mainboards RAM Slots, so you could use this RAM COOLER also on Mainboards with close Space between the RAM Slots. The maximal Distance from 1st RAM Slot to 4th RAM Slot is 52mm !!!
Size_nbsp_Alu RAM Module: 139 x 40mm_nbsp_Overall Size RAM COOLER_nbsp_5 without Fittings: 139 x_nbsp_58,5 x 13mm (L x B x H) Weight: ~524g RAM Modules: Aluminium 2mmCooling Plate:_nbsp_Pure Copper_nbsp_3mm Cover Plate:_nbsp_Brass nickel plated 3mm Fitting Plate:_nbsp_Brass nickel plated 5mm Connection Threads: G1/4´´
RAM COOLER 5 Upgrade Copperplate
With_nbsp_this Copper Plate you could upgrade your existing RAM COOLER 4 to the wider RAM COOLER 5 and could use it togehter with the new X58 based Motherboards using up to 6 Memory Modules !!!
Size_nbsp_Copper Plate: 139 x_nbsp_58,5 x 3mm (L x B x H) Cooling Plate:_nbsp_Pure Copper_nbsp_3mm
Manufacturer: MIPS ComputerGmbH
RAM COOLER Module 30mm
With_nbsp_this_nbsp_RAM COOLER Modul you could upgrade several RAM COOLERs to the maximum_nbsp_e.g. our RAM COOLER 5 including 3 RAM Modules_nbsp_for_nbsp_X58 based Motherboards using up to 6 Memory Modules !!!
Size_nbsp_Plate: 139 x_nbsp_30mm (L_nbsp_x H) Cooling Plate:_nbsp_Aluminium_nbsp_2mm
RAM COOLER Module 35mm
CAUTION: You only need this RAM COOLER Modul for some Corsair RAM Modules with a higher PCB !!!
Size_nbsp_Plate: 139 x_nbsp_35mm (L_nbsp_x H) Cooling Plate:_nbsp_Aluminium_nbsp_2mm
Thermalpad 0,5mm (120x20mm) for MIPS RAM Module
This ultrathin (0,5mm)_nbsp_Thermalpad you could use_nbsp_between your RAM Module and_nbsp_our RAM COOLER Modules for perfect heat transmission. Please notice,_nbsp_that you_nbsp_need 2 Pads for 1 doublesided RAM Module !!!
If you use singlesided RAM Modules you should take one of this ultrathin Thermalpad on the side where the RAM Chips are and on the empty side of your PCB you should use the thicker one part Number MCH354 or MCH355.
Size_nbsp_120 x_nbsp_20 x 0,5mm (L_nbsp_x B x H)_nbsp_ Thermal conductivity > 1,5W/mk, not electrical conductive !!!
Thermalpad 1mm (120x20mm) for MIPS RAM Module
If you use singlesided RAM Modules you should take this 1mm Thermalpad_nbsp_on the_nbsp_empty side of your RAM_nbsp_Module and on the other side where the RAM Chips located you should use the ultrathin 0,5mm Thermalpad_nbsp_order-number MCH353 !!!_nbsp_
Size_nbsp_120 x_nbsp_20 x 1mm (L_nbsp_x B x H)_nbsp_ Thermal conductivity > 1,2 W/mk, not electrical conductive !!!
Highend Thermalpad 1mm (120x20mm) for MIPS RAM Module
If you use singlesided RAM Modules you should take this 1mm Highend Thermalpad_nbsp_on the_nbsp_empty side of your RAM_nbsp_Module and on the other side where the RAM Chips located you should use the ultrathin 0,5mm Thermalpad_nbsp_order-number MCH353 !!!_nbsp_
Size_nbsp_120 x_nbsp_20 x 1mm (L_nbsp_x B x H)_nbsp_ Thermal conductivity >_nbsp_5 W/mk, not electrical conductive !!!