MIPS Productline Mainboard Sets Nickel Pom Black


MIPS Productline Mainboard Sets Copper Pom Black
GIGABYTE X58 Series COOLER Set Nickel POM Black ASUS P6T Deluxe Series COOLER Set Nickel POM Black ASUS Rampage 2 Extreme COOLER Set Nickel POM Black ASUS P6T6 WS Revolution COOLER Set Nickel POM Black EVGA X58 SLI & X58 FTW3 COOLER Set Nickel POM Black EVGA X58 SLI Classified Series COOLER Set Nickel POM Black EVGA X58 SLI3 / LE COOLER Set Nickel POM Black EVGA X58 SLI Classified 4-Way COOLER Set Nickel POM Black GIGABYTE X58A UD7 Rev.1 COOLER Set Nickel POM Black ASUS P6T7 WS Super Computer COOLER Set Nickel POM Black EVGA Classified SR-2 COOLER Set Nickel POM Black GIGABYTE X58A UD7 Rev.2 COOLER Set Nickel POM Black ASUS P8P67 Series Cooler Set Nickel POM Black ASUS P8x6x Series Cooler Set Nickel POM Black ASUS Maximus 4 Gene-Z Cooler Set Nickel POM Black
#xs#284;MIPS Productline#Mainboard Sets#Nickel Pom Black;MCH4429;GIGABYTE X58 Series COOLER Set Nickel POM Black;149,90;19;mch4429.jpg;mch4429_k.jpg;_vbCrLf_

GIGABYTE X58 Series_nbsp_COOLER Set POM Black_nbsp_without Fittings

;_vbCrLf_

This_nbsp_limited COOLER Set_nbsp_comes with nickel plated Baseplates and was_nbsp_developed for_nbsp_the following GIGABYTE_nbsp_Motherboards:

_vbCrLf_

- Gigabyte GA-EX58-UD4P, X58
- Gigabyte GA-EX58-UD5, X58
- Gigabyte GA-EX58-Extreme, X58

_vbCrLf_

This_nbsp_COOLER Set_nbsp_is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

_vbCrLf_

For easy mounting, appropriate screws, nuts and_nbsp_washers included._nbsp_
All_nbsp_COOLERs has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

_vbCrLf_

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

_vbCrLf_


Technical data_nbsp_Triplechip COOLER:

_vbCrLf_

Total size without connections: 151 x 113 x 14 mm (L x W x H without connections)
Weight: ~ 180g
Bottom: nickel coated pure copper 3mm_nbsp_
Cover plate: POM black 8mm_nbsp_
Connecting thread: G1/4_ez__ez_

_vbCrLf_

Technical data Mosfet COOLERs:

_vbCrLf_

Total size without connections: 71 x 19 x 17 mm (L x W x H without connections)
Weight: ~ 125g
Bottom: nickel coated pure copper 5mm_nbsp_
Cover plate: 2 x POM black 6mm_nbsp_
Connecting thread: G1/4_ez__ez_

_vbCrLf_

Our COOLER Sets_nbsp_are always delivered without fittings !!!

_vbCrLf_

Manufacturer: MIPS Computer GmbH

;;1;j;;;;;;;;;;;;;;;;;#LZ 14 Days# #xs#281;MIPS Productline#Mainboard Sets#Nickel Pom Black;MCH4430;ASUS P6T Deluxe Series COOLER Set Nickel POM Black;149,90;19;mch4430.jpg;mch4430_k.jpg;_vbCrLf_

ASUS P6T Deluxe Series_nbsp_COOLER Set POM Black_nbsp_without Fittings

;

This limited COOLER Set was developed for the_nbsp_ASUS_nbsp_P6T Deluxe Series_nbsp_Motherboards and comes with nickel plated Baseplates !!!

_vbCrLf_

This COOLER Set is easy to integrate the existing watercooling loop and achieved an excellent cooling performance.

_vbCrLf_

For easy mounting, appropriate screws, nuts and washers included._nbsp_
All COOLERs has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

_vbCrLf_

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

_vbCrLf_


Technical data Dualchip COOLER:

_vbCrLf_

Total size without connections:_nbsp_123 x 111 x 9 mm (L x W x H without connections)
Weight: ~ 170g
Bottom: nickel coated pure copper 3mm_nbsp_
Cover plate: POM black 6mm_nbsp_
Connecting thread: G1/4_ez__ez_

_vbCrLf_

Technical data Mosfet COOLER #1:

_vbCrLf_

Total size without connections: 90 x 16 x 17 mm (L x W x H without connections)
Weight: ~ 135g
Bottom: nickel coated pure copper 5mm
Cover plate: 2 x POM black 6mm_nbsp_
Connecting thread: G1/4_ez__ez_

_vbCrLf_

Technical data Mosfet COOLER #2:

_vbCrLf_

Total size without connections: 78 x 16 x 17 mm (L x W x H without connections)
Weight: ~ 125g
Bottom: nickel coated pure copper 5mm
Cover plate: 2 x POM black 6mm_nbsp_
Connecting thread: G1/4_ez__ez_

_vbCrLf_

Our COOLER Sets are always delivered without fittings !!!

_vbCrLf_

Manufacturer: MIPS Computer GmbH

;;2;j;;;;;;;;;;;;;;;;;#LZ 14 Days# #xs#282;MIPS Productline#Mainboard Sets#Nickel Pom Black;MCH4431;ASUS Rampage 2 Extreme COOLER Set Nickel POM Black;149,90;19;mch4431.jpg;mch4431_k.jpg;_vbCrLf_

ASUS Rampage 2 Extreme_nbsp_COOLER Set POM Black_nbsp_without Fittings

;_vbCrLf_

This_nbsp_limited COOLER Set_nbsp_was_nbsp_developed for_nbsp_the_nbsp_legendary ASUS_nbsp_Rampage 2 Extreme Motherboard and comes with_nbsp_nickel plated Baseplates !!!_nbsp_

_vbCrLf_

This_nbsp_COOLER Set_nbsp_is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

_vbCrLf_

For easy mounting, appropriate screws, nuts and_nbsp_washers included._nbsp_
All_nbsp_COOLERs has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

_vbCrLf_

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

_vbCrLf_


Technical data_nbsp_Dualchip COOLER:

_vbCrLf_

Total size without connections: 167 x 117 x_nbsp_9 mm (L x W x H without connections)
Weight: ~ 180g
Bottom: nickel coated pure copper 3mm_nbsp_
Cover plate: POM black 6mm_nbsp_
Connecting thread: G1/4_ez__ez_

_vbCrLf_

Technical data Mosfet COOLER #1:

_vbCrLf_

Total size without connections: 90 x 16 x 17 mm (L x W x H without connections)
Weight: ~ 135g
Bottom: nickel coated pure copper 5mm
Cover plate: 2 x POM black 6mm_nbsp_
Connecting thread: G1/4_ez__ez_

_vbCrLf_

Technical data Mosfet COOLER #2:

_vbCrLf_

Total size without connections: 75 x 16 x 17 mm (L x W x H without connections)
Weight: ~ 125g
Bottom: nickel coated pure copper 5mm
Cover plate: 2 x POM black 6mm_nbsp_
Connecting thread: G1/4_ez__ez_

_vbCrLf_

Our COOLER Sets_nbsp_are always delivered without fittings !!!

_vbCrLf_

Manufacturer: MIPS Computer GmbH

;;3;j;;;;;;;;;;;;;;;;;#LZ 14 Days# #xs#283;MIPS Productline#Mainboard Sets#Nickel Pom Black;MCH4432;ASUS P6T6 WS Revolution COOLER Set Nickel POM Black;149,90;19;mch4432.jpg;mch4432_k.jpg;_vbCrLf_

ASUS P6T6 WS Revolution_nbsp_COOLER Set POM Black_nbsp_without Fittings

;_vbCrLf_

This_nbsp_limited COOLER Set_nbsp_was_nbsp_developed for_nbsp_the_nbsp_legendary_nbsp_ASUS P6T6 WS Revolution Motherboard and comes with nickel plated Baseplates !!!

_vbCrLf_

This_nbsp_COOLER Set_nbsp_is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

_vbCrLf_

For easy mounting, appropriate screws, nuts and_nbsp_washers included._nbsp_
All_nbsp_COOLERs has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

_vbCrLf_

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

_vbCrLf_


Technical data_nbsp_Triplechip COOLER:

_vbCrLf_

Total size without connections: 150 x 118 x 11 mm (L x W x H without connections)
Weight: ~ 180g
Bottom: nickel coated pure copper 3mm_nbsp_
Cover plate: POM black 8mm_nbsp_
Connecting thread: 1 / 4_ez__ez_

_vbCrLf_

Technical data Mosfet COOLER #1:

_vbCrLf_

Total size without connections: 90 x 16 x 17 mm (L x W x H without connections)
Weight: ~ 135g
Bottom: nickel coated pure copper 5mm
Cover plate: 2 x POM black 6mm_nbsp_
Connecting thread: G1/4_ez__ez_

_vbCrLf_

Technical data Mosfet COOLER #2:

_vbCrLf_

Total size without connections: 78 x 14 x 17 mm (L x W x H without connections)
Weight: ~ 130g
Bottom: nickel coated pure copper 5mm
Cover plate: 2 x POM black 6mm_nbsp_
Connecting thread: G1/4_ez__ez_

_vbCrLf_

Our COOLER Sets_nbsp_are always delivered without fittings !!!

_vbCrLf_

Manufacturer: MIPS Computer GmbH

;;4;j;;;;;;;;;;;;;;;;;#LZ 14 Days# #xs#285;MIPS Productline#Mainboard Sets#Nickel Pom Black;MCH4434;EVGA X58 SLI & X58 FTW3 COOLER Set Nickel POM Black;129,90;19;mch4434.jpg;mch4434_k.jpg;_vbCrLf_

EVGA X58 SLI & X58 FTW3_nbsp_COOLER Set POM Black_nbsp_without Fittings

;_vbCrLf_

This_nbsp_limited COOLER Set_nbsp_was_nbsp_developed for_nbsp_the_nbsp_following EVGA_nbsp_Motherboards and comes with_nbsp_nickel platet Baseplates !!!

_vbCrLf_

-_nbsp_EVGA X58 SLI (132-BL-E758-A1)_nbsp_
-_nbsp_EVGA X58 FTW³ (132-GT-E768-TR)

_vbCrLf_

This_nbsp_COOLER Set_nbsp_is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

_vbCrLf_

For easy mounting, appropriate screws, nuts and_nbsp_washers included._nbsp_
All_nbsp_COOLERs has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

_vbCrLf_

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

_vbCrLf_


Technical Data_nbsp_Dualchip COOLER:

_vbCrLf_

Total size without connections: 123 x 111 x 11 mm (L x W x H without connections)
Weight: ~ 160g
Bottom: nickel coatet pure copper 5mm_nbsp_
Cover plate: POM black 6mm_nbsp_
Connecting thread: G1/4_ez__ez_

_vbCrLf_

Technical Data Mosfet COOLER:

_vbCrLf_

Total size without connections:_nbsp_127 x_nbsp_28 x_nbsp_21 mm (L x W x H without connections)
Weight: ~ 160g
Bottom:_nbsp_3 x nickel coated pure copper_nbsp_5mm
Cover plate:_nbsp_POM black_nbsp_6mm_nbsp_
Connecting thread: G1/4_ez__ez_

_vbCrLf_

Our COOLER Sets_nbsp_are always delivered without fittings !!!

_vbCrLf_

Manufacturer: MIPS Computer GmbH

;;5;j;;;;;;;;;;;;;;;;;#LZ 14 Days# #xs#286;MIPS Productline#Mainboard Sets#Nickel Pom Black;MCH4435;EVGA X58 SLI Classified Series COOLER Set Nickel POM Black;139,90;19;mch4435.jpg;mch4435_k.jpg;_vbCrLf_

EVGA X58 SLI_nbsp_Classified Series COOLER Set POM Black_nbsp_without Fittings

;_vbCrLf_

This_nbsp_limited COOLER Set_nbsp_was_nbsp_developed for_nbsp_the_nbsp_following EVGA X58 SLI_nbsp_Classified Series_nbsp_Motherboards and comes with_nbsp_nickel platet Baseplates !!!

_vbCrLf_

_nbsp_- EVGA X58 SLI Classified (141-BL-E759-A1)

_vbCrLf_

- EVGA X58 SLI Classified (141-BL-E760- A1)

_vbCrLf_

- EVGA X58 SLI Classified 3 (141-GT-E770-ER)

_vbCrLf_

This_nbsp_COOLER Set_nbsp_is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

_vbCrLf_

For easy mounting, appropriate screws, nuts and_nbsp_washers included._nbsp_
All_nbsp_COOLERs has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

_vbCrLf_

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

_vbCrLf_


Technical data_nbsp_Triplechip COOLER:

_vbCrLf_

Total size without connections: 150 x 148 x 11 mm (L x W x H without connections)
Weight: ~ 170g
Bottom: nickel coatet pure copper 5mm_nbsp_
Cover plate: POM black 6mm_nbsp_
Connecting thread: G1/4_ez__ez_

_vbCrLf_

Technical data Mosfet COOLER:

_vbCrLf_

Total size without connections:_nbsp_136 x_nbsp_52 x_nbsp_18 mm (L x W x H without connections)
Weight: ~ 150g
Bottom:_nbsp_2 x nickel coated pure copper_nbsp_5mm
Cover plate:_nbsp_POM black_nbsp_8mm_nbsp_
Connecting thread: G1/4_ez__ez_

_vbCrLf_

Our COOLER Sets_nbsp_are always delivered without fittings !!!

_vbCrLf_

Manufacturer: MIPS Computer GmbH

;;6;j;;;;;;;;;;;;;;;;;#LZ 14 Days# #xs#287;MIPS Productline#Mainboard Sets#Nickel Pom Black;MCH4437;EVGA X58 SLI3 / LE COOLER Set Nickel POM Black;124,90;19;mch4436.jpg;mch4436_k.jpg;_vbCrLf_

EVGA X58 SLI3 /_nbsp_LE COOLER Set POM Black_nbsp_without Fittings

;_vbCrLf_

This_nbsp_limited COOLER Set_nbsp_was_nbsp_developed for_nbsp_the_nbsp_following EVGA_nbsp_Motherboards and comes with_nbsp_nickel platet Baseplates !!!

_vbCrLf_

- EVGA X58 SLI LE (141-BL-E757_A1)

_vbCrLf_

- EVGA X58 SLI 3 (131-GT-E767-TR)

_vbCrLf_

This_nbsp_COOLER Set_nbsp_is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

_vbCrLf_

For easy mounting, appropriate screws, nuts and_nbsp_washers included._nbsp_
All_nbsp_COOLERs has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

_vbCrLf_

IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

_vbCrLf_


Technical Data_nbsp_Dualchip COOLER:

_vbCrLf_

Total size without connections: 133 x 103 x 19 mm (L x W x H without connections)
Weight: ~ 180g
Bottom: nickel coatet pure copper 5mm_nbsp_
Cover plate: 2 x POM black 7mm_nbsp_
Connecting thread: G1/4_ez__ez_

_vbCrLf_

Technical Data Mosfet COOLER:

_vbCrLf_

Total size without connections:_nbsp_83 x_nbsp_19 x_nbsp_21 mm (L x W x H without connections)
Weight: ~ 130g
Bottom:_nbsp_3 x nickel coated pure copper_nbsp_5mm
Cover plate:_nbsp_POM black_nbsp_6mm_nbsp_
Connecting thread: G1/4_ez__ez_

_vbCrLf_

Our COOLER Sets_nbsp_are always delivered without fittings !!!

_vbCrLf_

Manufacturer: MIPS Computer GmbH

;;7;j;;;;;;;;;;;;;;;;;#LZ in stock# #xs#388;MIPS Productline#Mainboard Sets#Nickel Pom Black;MCH4438;EVGA X58 SLI Classified 4-Way COOLER Set Nickel POM Black;139,90;19;mch4438.jpg;mch4438_k.jpg;_vbCrLf_

EVGA X58 SLI_nbsp_Classified 4-Way_nbsp_COOLER Set_nbsp_Nickel POM Black_nbsp_without Fittings

;_vbCrLf_

This_nbsp_new limited COOLER Set_nbsp_was_nbsp_developed for_nbsp_the_nbsp_EVGA X58 Classified 4-Way Mainboard (170-BL-E762-A1) and comes with_nbsp_nickel platet Baseplates !!!

_vbCrLf_

The_nbsp_COOLER Set_nbsp_is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

_vbCrLf_

For easy mounting, appropriate screws, nuts and_nbsp_washers included._nbsp_
All_nbsp_COOLERs has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

_vbCrLf_

IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

_vbCrLf_

CAUTION: Please use a non electrical conductive Thermalpaste like Arctic Cooling MX Series (MX2 / MX3) for the digital mosfets, chipsets and NF200 Chips. Do n o t_nbsp__nbsp_use the original Mosfet Pads, they are too thick for use with_nbsp_our Mosfet Cooler !!!_nbsp_ Fasten the_nbsp_fixing bolts in the area of both NF200 chips only hand-tight so_nbsp_that you do not damage these sensitive chips !!!

_vbCrLf_


Technical data_nbsp_Quadchip COOLER:

_vbCrLf_

Total size without connections: 175 x 165 x 11 mm (L x W x H without connections)
Weight: ~ 200g
Bottom:_nbsp_nickel coated pure copper 5mm_nbsp_
Cover plate: POM black 6mm_nbsp_
Connecting thread: G1/4_ez__ez_

_vbCrLf_

Technical data Mosfet COOLER:

_vbCrLf_

Total size without connections:_nbsp_136 x_nbsp_52 x_nbsp_18 mm (L x W x H without connections)
Weight: ~ 160g
Bottom:_nbsp_2 x nickel coated_nbsp_pure copper_nbsp_5mm
Cover plate:_nbsp_POM black_nbsp_8mm_nbsp_
Connecting thread: G1/4_ez__ez_

_vbCrLf_

Our COOLER Sets_nbsp_are always delivered without fittings !!!

_vbCrLf_

Manufacturer: MIPS Computer GmbH

;;8;j;;;;;;;;;;;;;;;;;#LZ 14 Days# #xs#389;MIPS Productline#Mainboard Sets#Nickel Pom Black;MCH4439;GIGABYTE X58A UD7 Rev.1 COOLER Set Nickel POM Black;139,90;19;mch4439.jpg;mch4439_k.jpg;_vbCrLf_

GIGABYTE X58A UD7 Rev.1 COOLER Set Nickel POM Black_nbsp_without Fittings

;_vbCrLf_

Limited Nickel-POM version with nickel plated cooling plate!

_vbCrLf_
_vbCrLf_

With this waterblock kit we offer the perfectly tailored cooling solution for the Gigabyte GA-X58A-UD7 Rev.1 Mainboard.

_vbCrLf_

On this Mainboard the Southbridge, Northbridge and the_nbsp_ SATA2 Chip as well as VRM modules are cooled by one heatpipe. This heatpipe only works properly with the airflow from a large CPU cooler. We hence strongly recommend cooling the Chipsets, as well as VRM modules with water if you cool your CPU with water. This enables stable operation even when overclocked!

With our new Triple-Chip waterblocks it is possible to cool Southbridge, Northbridge as well as the SATA2 Chip with one waterblock which offers you the following advantages:

_vbCrLf_
    _vbCrLf_
  • _vbCrLf_

    No more fittings in the expansion slot area, all slots are fully operable with this waterblock!

    • _vbCrLf_
  • _vbCrLf_

    Only 2 fittings are required, even very large fittings are possible as the connection threads are outside of the expansion slot area.

    • _vbCrLf_
  • _vbCrLf_

    The distance between the threads even allows the use of High-flow fittings

    • _vbCrLf_
  • _vbCrLf_

    In combination with the included VRM waterblock_nbsp_ all heat-sensitive elements are cooled with an uniform design!

_vbCrLf_

This waterblock is the perfect expansion your you if you are already using a watercooled system.

_vbCrLf_

IMPORTANT: The deinstallation of the stock Chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

_vbCrLf_

Recommendation: For protection of the open X58 Northbridge we recommend to order the protective pad_nbsp_MCH0352._nbsp_

_vbCrLf_

Please note: The Triple-chip waterblock is installed with the included screws and plastic washers from the back of the Mainboard. Please tighten the screws evenly and avoid overtightening! For the Chipsets_nbsp_please use a non-conductive thermal compound such as the Arctic Cooling MX 2/3 series._nbsp_The Mosfet waterblocks are also mounted with the included screws and washers from the back of the Mainboard, please also ensure even tightening and avoid overtightening! For the VRM modules and_nbsp_the SATA-2 Chip_nbsp_we recommend using the original thermal pads of the heatpipe or use an equivalent product.

_vbCrLf_


Technical specifications Triple Chip waterblock:
Dimensions baseplate: 146 x 113 mm
Overall size without fittings: 151 x 113 x 11mm (L x W x H)
Weight: ~177g
Baseplate material: Pure copper 3mm, nickel plated
Cover material: POM black 8mm
Connection thread size: 1/4´´

_vbCrLf_

Technical specifications Dual Mosfet waterblock:
Dimensions baseplate: 81 x 13 mm
Overall size without fittings: 108 x 90 x 21mm (L x W x H wihtout fittings)
Weight: ~120g
Baseplate: Nickel plated copper 5mm
Top plates: 2x 8mm POM black
Connection thread size: G1/4_az_

_vbCrLf_

Extent of delivery:
1 x GIGABYTE GA-X58A-UD7 Triple-Chip water block Rev.1&2 Nickel POM incl. 2 spacer rings
1 x GIGABYTE GA-X58A-UD7 Dual Mosfet water block Rev.1_nbsp_Nickel POM incl. 2 spacer rings

_vbCrLf_

Our waterblocks are always shipped without fittings

_vbCrLf_

Manufacturer: MIPS Computer GmbH

;;9;j;;;;;;;;;;;;;;;;;#LZ in stock# #xs#390;MIPS Productline#Mainboard Sets#Nickel Pom Black;MCH4440;ASUS P6T7 WS Super Computer COOLER Set Nickel POM Black;179,90;19;mch4440.jpg;mch4440_k.jpg;_vbCrLf_

ASUS P6T7 WS_nbsp_Super Computer_nbsp_COOLER Set Nickel POM Black_nbsp_without Fittings

;_vbCrLf_

This_nbsp_limited COOLER Set_nbsp_was_nbsp_developed for_nbsp_the_nbsp_legendary_nbsp_ASUS P6T7 WS_nbsp_Super Computer_nbsp_Motherboard and comes with nickel plated Baseplates !!!

_vbCrLf_

This_nbsp_COOLER Set_nbsp_is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

_vbCrLf_

For easy mounting, appropriate screws, nuts and_nbsp_washers included._nbsp_
All_nbsp_COOLERs has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

_vbCrLf_

IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

_vbCrLf_

CAUTION: Please use a non electrical conductive Thermalpaste like Arctic Cooling MX Series (MX2 / MX3) for_nbsp_both chipsets_nbsp_(NB,SB) and the NF200 Chips, for the Mosfets_nbsp_you should take_nbsp_the Thermalpads from the original Heatpipe !!!_nbsp__nbsp_Fasten all the_nbsp_fixing bolts_nbsp_only hand-tight so_nbsp_that you do not damage_nbsp_any sensitive chips !!!

_vbCrLf_

Technical data_nbsp_Quadchip COOLER:

_vbCrLf_

Total size without connections: 153 x 165 x_nbsp_8/16 mm (L x W x H without connections)
Weight: ~ 200g
Bottom: nickel coated pure copper 3mm_nbsp_
Cover plate: POM black 8mm_nbsp_
Connecting thread: 1 / 4_ez__ez_

_vbCrLf_

Technical data Mosfet COOLER #1:

_vbCrLf_

Total size without connections: 93 x_nbsp_20 x 17 mm (L x W x H without connections)
Weight: ~ 123g
Bottom: nickel coated pure copper 5mm
Cover plate: 2 x POM black 6mm_nbsp_
Connecting thread: G1/4_ez__ez_

_vbCrLf_

Technical data Mosfet COOLER #2:

_vbCrLf_

Total size without connections: 78 x_nbsp_20 x 17 mm (L x W x H without connections)
Weight: ~ 103g
Bottom: nickel coated pure copper 5mm
Cover plate: 2 x POM black 6mm_nbsp_
Connecting thread: G1/4_ez__ez_

_vbCrLf_

Technical data RAM Mosfet COOLER:

_vbCrLf_

Total size without connections:_nbsp_63 x_nbsp_27 x 13 mm (L x W x H without connections)
Weight: ~ 60g
Bottom: nickel coated pure copper 5mm
Cover plate:_nbsp_POM black 8mm_nbsp_
Connecting thread: G1/4_ez__ez_

_vbCrLf_

Our COOLER Sets_nbsp_are always delivered without fittings !!!

_vbCrLf_

Manufacturer: MIPS Computer GmbH

;;10;j;;;;;;;;;;;;;;;;;#LZ 14 Days# #xs#394;MIPS Productline#Mainboard Sets#Nickel Pom Black;MCH4442;EVGA Classified SR-2 COOLER Set Nickel POM Black;169,90;19;mch4442.jpg;mch4442_k.jpg;_vbCrLf_

EVGA Classified SR-2_nbsp_COOLER Set Nickel POM Black_nbsp_without Fittings

;

We present a specially designed waterblock kit for your EVGA SR-2_nbsp_Mainboard.

_vbCrLf_

Limited Nickel-POM edition with nickel plated cooling plates!

_vbCrLf_

On this Mainboard the VRM modules, Southbridge and Northbridge as well as both NF200 Chips are connected and cooled with a single passively cooled Heatpipe system. This Heatpipe only suffices to cool the Mainboard with very powerful CPU fans to allows stable operation.

_vbCrLf_

If you are already using a watercooling system this_nbsp_Cooler Set_nbsp_is the perfect extension for your system!

_vbCrLf_

With our new Quadchip waterblock it is possible to cool Southbridge, Northbridge as well as the NF200 Chips with one waterblock which offers you the following advantages:

_vbCrLf_

- No more fittings in the expansion slot area, all slots are fully operable with this waterblock!

_vbCrLf_

- Only 2 fittings are required, even very large fittings are possible as the connection threads are outside of the expansion slot area.

_vbCrLf_

IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

_vbCrLf_

For protection of the open_nbsp_Northbridge we recommend ordering the protective pad MCH0352!

_vbCrLf_

Mounting note: The main waterblock is mounted from the back of the Mainboard using the included screws and plastic washers. Make sure to fasten the screws only hand-tight and evenly! For both Chipsets, both NF200 Chips as well as the Mosfets please use an electrically non-conductive thermal compound such as the Arctic Cooling MX 2/3 series. For the coils above the Mosfets please use the included thermal pad! The Mosfet waterblock for the CPU0 is also mounted with the included screws, washers and a backplate from the back of the Mainboard. Make sure to also only hand-tighten these screws and to do so evenly.

_vbCrLf_

Technical specifications main waterblock:
Dimensions baseplate: 181 x 198 mm
Overall size without fittings: 181 x 198 x 13/20mm (L x W x H without fittings)
Weight: ~454g
Baseplate material: 4mm pure copper (nickel plated)
Top plate: POM black 2/3 x 6mm
Connection threads: G1/4´´

_vbCrLf_

Technical specifications Mosfet_nbsp_waterblock CPU0:
Dimensions baseplate: 88 x 32mm
Overall size without fittings 88 x 32 x 14 mm (L x W x H without fittings)
Weight: ~111g
Baseplate material: 5mm pure copper (nickel plated)
Top plate: POM black 7mm
Connection threads: G1/4´´

_vbCrLf_

Our waterblocks are always shipped without fittings !!!

Extent of delivery:
1 x_nbsp_EVGA SR-2_nbsp_Quadchip waterblock Nickel POM including 2 spacer rings, backplate and mounting kit
1x EVGA SR-2_nbsp_Mosfet waterblock CPU0 Nickel_nbsp_POM including 2 spacer rings, backplate and mounting kit

_vbCrLf_

Manufacturer: MIPS Computer GmbH

_vbCrLf_

_nbsp_

;;11;j;;;;;;;;;;;;;;;;;#LZ 14 Days# #xs#395;MIPS Productline#Mainboard Sets#Nickel Pom Black;MCH4443;GIGABYTE X58A UD7 Rev.2 COOLER Set Nickel POM Black;139,90;19;mch4439.jpg;mch4439_k.jpg;_vbCrLf_

GIGABYTE X58A UD7 Rev.2 COOLER Set Nickel POM Black_nbsp_without Fittings

;_vbCrLf_

Limited Nickel-POM version with nickel plated cooling plate!

_vbCrLf_
_vbCrLf_

With this waterblock kit we offer the perfectly tailored cooling solution for the Gigabyte GA-X58A-UD7 Rev.2 Mainboard.

_vbCrLf_

On this Mainboard the Southbridge, Northbridge and the_nbsp_ SATA2 Chip as well as VRM modules are cooled by one heatpipe. This heatpipe only works properly with the airflow from a large CPU cooler. We hence strongly recommend cooling the Chipsets, as well as VRM modules with water if you cool your CPU with water. This enables stable operation even when overclocked!

With our new Triple-Chip waterblocks it is possible to cool Southbridge, Northbridge as well as the SATA2 Chip with one waterblock which offers you the following advantages:

_vbCrLf_
    _vbCrLf_
  • _vbCrLf_

    No more fittings in the expansion slot area, all slots are fully operable with this waterblock!

    _vbCrLf_
  • _vbCrLf_

    Only 2 fittings are required, even very large fittings are possible as the connection threads are outside of the expansion slot area.

    _vbCrLf_
  • _vbCrLf_

    The distance between the threads even allows the use of High-flow fittings

    _vbCrLf_
  • _vbCrLf_

    In combination with the included VRM waterblock_nbsp_ all heat-sensitive elements are cooled with an uniform design!

_vbCrLf_

This waterblock is the perfect expansion_nbsp_if you are already using a watercooled system.

_vbCrLf_

IMPORTANT: The deinstallation of the stock Chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

_vbCrLf_

Recommendation: For protection of the open X58 Northbridge we recommend to order the protective pad_nbsp_MCH0352._nbsp_

_vbCrLf_

Please note: The Triple-chip waterblock is installed with the included screws and plastic washers from the back of the Mainboard. Please tighten the screws evenly and avoid overtightening! For the Chipsets_nbsp_please use a non-conductive thermal compound such as the Arctic Cooling MX 2/3 series._nbsp_The Mosfet waterblocks are also mounted with the included screws and washers from the back of the Mainboard, please also ensure even tightening and avoid overtightening! For the VRM modules and_nbsp_the SATA-2 Chip_nbsp_we recommend using the original thermal pads of the heatpipe or use an equivalent product.

_vbCrLf_


Technical specifications Triple Chip waterblock:
Dimensions baseplate: 146 x 113mm
Overall size without fittings: 151 x 113 x 11mm (L x W x H)
Weight: ~177g
Baseplate material: Pure copper 3mm, nickel plated
Cover material: POM black 8mm
Connection thread size: 1/4´´

_vbCrLf_

Technical specifications Dual Mosfet waterblock:
Dimensions baseplate:_nbsp_98 x 13mm / 73 x 11mm_nbsp_
Overall size without fittings: 98 x 96 x 21mm (L x W x H wihtout fittings)
Weight: ~120g
Baseplate: Nickel plated copper 5mm
Top plates: 2x 8mm POM black
Connection thread size: G1/4_az_

_vbCrLf_

Extent of delivery:
1 x GIGABYTE GA-X58A-UD7 Triple-Chip water block Rev.1&2 Nickel POM incl. 2 spacer rings
1 x GIGABYTE GA-X58A-UD7 Dual Mosfet water block Rev.2_nbsp_Nickel POM incl. 2 spacer rings

_vbCrLf_

Our waterblocks are always shipped without fittings

_vbCrLf_

Manufacturer: MIPS Computer GmbH

;;12;j;;;;;;;;;;;;;;;;;#LZ 14 Days# #xs#400;MIPS Productline#Mainboard Sets#Nickel Pom Black;MCH4447;ASUS P8P67 Series Cooler Set Nickel POM Black;88,90;19;mch4447.jpg;mch4447_k.jpg;_vbCrLf_

ASUS P8P67 Series Cooler Set_nbsp_Nickel POM Black_nbsp_without Fittings

;_vbCrLf_

Limited Nickel-POM version with nickel plated cooling plates!

_vbCrLf_
_vbCrLf_

With this waterblock kit we offer the perfectly tailored cooling solution for the_nbsp_following Asus_nbsp_Mainboards:

_vbCrLf_

- ASUS P8P67

_vbCrLf_

- ASUS_nbsp_P8P67 Pro

_vbCrLf_

- ASUS P8P67 Evo_nbsp__nbsp_

_vbCrLf_

This waterblock is the perfect expansion, if you are already using a watercooled system.

_vbCrLf_

IMPORTANT: The deinstallation of the stock Chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

_vbCrLf_

Please note: The Dual Mosfet waterblock is installed with the included screws and plastic washers from the back of the Mainboard. Please tighten the screws evenly and avoid overtightening! For the_nbsp_SB-Chip please use a non-conductive thermal_nbsp_paste such as the Arctic Cooling MX 2/3 series._nbsp_The SB_nbsp_waterblock are_nbsp_mounted with the included screws and washers from the_nbsp_top of the Mainboard, please also ensure even tightening and avoid overtightening! For the VRM modules_nbsp_we recommend using the original thermal pads of the heatpipe or use an equivalent product. To prevent bending the Mainboard_nbsp_there are_nbsp_a nickeled Backplate included !!!

_vbCrLf_


Technical specifications_nbsp_SB waterblock:
Dimensions baseplate:_nbsp_42 x 42mm
Overall size without fittings: 50 x_nbsp_42 x 11mm (L x W x H)
Weight: ~83g
Baseplate material: Pure copper 5mm, nickel plated
Cover material: POM black 6mm
Connection thread size: 1/4´´

_vbCrLf_

Technical specifications Dual Mosfet waterblock:
Dimensions baseplate:_nbsp_95 x 15mm /_nbsp_84 x 14mm_nbsp_
Overall size without fittings:_nbsp_129 x_nbsp_108 x 21mm (L x W x H wihtout fittings)
Weight: ~176g
Baseplate: Nickel plated copper 5mm
Top plates: 2x 8mm POM black
Connection thread size: G1/4_az_

_vbCrLf_

Our waterblocks are always shipped without fittings

_vbCrLf_

Manufacturer: MIPS Computer GmbH

;;13;j;j;;;;;;;;;;;;;;;;#LZ 14 Days# #xs#401;MIPS Productline#Mainboard Sets#Nickel Pom Black;MCH4448;ASUS P8x6x Series Cooler Set Nickel POM Black;92,80;19;mch4448.jpg;mch4448_k.jpg;_vbCrLf_

ASUS P8x6x Series Cooler Set_nbsp_Nickel POM Black_nbsp_without Fittings

;_vbCrLf_

Limited Nickel-POM version with nickel plated cooling plates!

_vbCrLf_
_vbCrLf_

With this waterblock kit we offer the perfectly tailored cooling solution for the_nbsp_following Asus_nbsp_Mainboards:

_vbCrLf_

- ASUS P8P67 Deluxe

_vbCrLf_

- ASUS P8Z68-V

_vbCrLf_

- ASUS P8Z68-V PRO

_vbCrLf_

- ASUS P8Z68 Deluxe

_vbCrLf_

This waterblock is the perfect expansion, if you are already using a watercooled system.

_vbCrLf_

IMPORTANT: The deinstallation of the stock Chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

_vbCrLf_

Please note: The Dual Mosfet waterblock is installed with the included screws and plastic washers from the back of the Mainboard. Please tighten the screws evenly and avoid overtightening! For the_nbsp_SB-Chip please use a non-conductive thermal_nbsp_paste such as the Arctic Cooling MX 2/3 series._nbsp_The SB_nbsp_waterblock are_nbsp_mounted with the included screws and washers from the_nbsp_top of the Mainboard, please also ensure even tightening and avoid overtightening! For the VRM modules_nbsp_we recommend using the original thermal pads of the heatpipe or use an equivalent product. To prevent bending the Mainboard_nbsp_there are_nbsp_2 nickeled Backplates included !!!

_vbCrLf_


Technical specifications_nbsp_SB waterblock:
Dimensions baseplate:_nbsp_42 x 42mm
Overall size without fittings: 50 x_nbsp_42 x 11mm (L x W x H)
Weight: ~83g
Baseplate material: Pure copper 5mm, nickel plated
Cover material: POM black 6mm
Connection thread size: 1/4´´

_vbCrLf_

Technical specifications Dual Mosfet waterblock:
Dimensions baseplate:_nbsp_138 x 16mm /_nbsp_96 x 14mm_nbsp_
Overall size without fittings:_nbsp_145 x_nbsp_111 x 21mm (L x W x H wihtout fittings)
Weight: ~186g
Baseplate: Nickel plated copper 5mm
Top plates: 2x 8mm POM black
Connection thread size: G1/4_az_

_vbCrLf_

Our waterblocks are always shipped without fittings

_vbCrLf_

Manufacturer: MIPS Computer GmbH

;;14;j;j;;;;;;;;;;;;;;;;#LZ 14 Days# #xs#402;MIPS Productline#Mainboard Sets#Nickel Pom Black;MCH4449;ASUS Maximus 4 Gene-Z Cooler Set Nickel POM Black;92,80;19;mch4449.jpg;mch4449_k.jpg;_vbCrLf_

ASUS_nbsp_Maximus 4 Gene-Z_nbsp_Cooler Set_nbsp_Nickel POM Black_nbsp_without Fittings

;_vbCrLf_

Limited Nickel-POM version with nickel plated cooling plates!

_vbCrLf_
_vbCrLf_

With this waterblock kit we offer the perfectly tailored cooling solution for the_nbsp_ASUS Maximus 4 Gene-Z_nbsp_Mainboard.

_vbCrLf_

This waterblock is the perfect expansion, if you are already using a watercooled system.

_vbCrLf_

IMPORTANT: The deinstallation of the stock Chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

_vbCrLf_

Please note: The Dual Mosfet waterblock is installed with the included screws and plastic washers from the back of the Mainboard. Please tighten the screws evenly and avoid overtightening! For the_nbsp_SB-Chip please use a non-conductive thermal_nbsp_paste such as the Arctic Cooling MX 2/3 series._nbsp_The SB_nbsp_waterblock are_nbsp_mounted with the included screws and washers from the_nbsp_back of the Mainboard, please also ensure even tightening and avoid overtightening! For the VRM modules_nbsp_please use the included pads. To prevent bending the Mainboard_nbsp_there are_nbsp_2 nickeled Backplates included !!!

_vbCrLf_


Technical specifications_nbsp_SB waterblock:
Dimensions baseplate:_nbsp_46 x 46mm
Overall size without fittings:_nbsp_46 x_nbsp_46 x 11mm (L x W x H)
Weight: ~120g
Baseplate material: Pure copper 5mm, nickel plated
Cover material: POM black 6mm
Connection thread size: 1/4´´

_vbCrLf_

Technical specifications Dual Mosfet waterblock:
Dimensions baseplate:_nbsp_113 x 16mm /_nbsp_109 x 14mm_nbsp_
Overall size without fittings:_nbsp_116 x_nbsp_115 x 21mm (L x W x H wihtout fittings)
Weight: ~186g
Baseplate: Nickel plated copper 5mm
Top plates: 2x 8mm POM black
Connection thread size: G1/4_az_

_vbCrLf_

Our waterblocks are always shipped without fittings

_vbCrLf_

Manufacturer: MIPS Computer GmbH

;;15;j;j;;;;;;;;;;;;;;;;#LZ 14 Days#">