MIPS Productline Chipset Cooler Copper Brass Classic

MSI K8N Series Northbridge COOLER_nbsp_without Fittings

This Chipset_nbsp_COOLER is specifically designed for the following MSI K8N Motherboards:

- MSI K8N Neo4 Platinum
- MSI K8N Neo4 Platinum 54g
- MSI K8N Diamond / SLI
- MSI K8N Diamond-54g / SLI
- MSI K8N Diamond Plus

Especially at the Diamond SLI boards in conjunction with 2 PCI-e graphics cards is the 2nd or lower graphics card directly to the original chipset cooler on. This gets the air swirled and the fan noise also increased.

If you already have a watercooling in_nbsp_use, we have this the ideal complement for your system.

The Chipset_nbsp_COOLER is easy to integrate in the existing waterloop and achieved an excellent cooling performance. The connections are so placed that they are exactly between the graphics card run. A contact with the 2nd or lower graphics card is no longer held.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The cooler has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

WARNING: The dismantling of the original chipset cooler leads to loss of warranty, you are therefore also in the careful reassembly of this product._nbsp_No liability_nbsp_for damages!

Technical data:

Size plate: 48 x 40mm
Total size without connections: 55 x 51 x 10 mm (L x W x H without connections)
Weight: ~ 134g
Bottom:_nbsp_Pure Copper_nbsp_5mm
Upper plate: Brass 5mm
Connecting thread: G1/4_ez__ez_

Our COOLERs are always delivered without_nbsp_fittings !!!_nbsp_

Manufacturer: MIPS Computer GmbH

ASUS Universal Southbridge COOLER without Fittings

This Southbridge_nbsp_COOLER was optional for the following ASUS Motherboards developed:

- ASUS Striker II Extreme (3-way SLI with 3 x single-slot Wakü VGA_ez_s possible)
- ASUS Striker II NSE (3-way SLI with 3 x single-slot Wakü VGA_ez_s possible)
- ASUS Maximus II Formula (CF 2 x dual-slot VGA_ez_s possible)
- ASUS Rampage Extreme x48 (CF 2 x dual-slot VGA_ez_s possible)

This Southbridge_nbsp_COOLER is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance. The connections are so placed that they are exactly between the graphics card run. Due to the long holes you can Southbridge cooler exactly aligned to contact with the graphics cards exclude!

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

WARNING: The dismantling of the original chipset cooler leads to loss of warranty, you are therefore also in the careful reassembly of this product. No liability for damages!

Technical data:

Size plate: 40 x 50mm
Total size without connections: 51 x 52 x 10 mm (L x W x H without connections)
Weight: ~ 134g
Bottom:_nbsp_Pure Copper_nbsp_5mm
Upper plate: Brass 5mm
Connecting thread: G1/4_ez__ez_

Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

ASUS Universal Chipset COOLER without Fittings_nbsp_

This Chipset_nbsp_COOLER is designed for a variety of ASUS motherboards and can be_nbsp_mounted on the following Mainboards:

- ASUS A8N-E
- ASUS A8N-SLI
- ASUS A8N-SLI Deluxe
- ASUS A8N-SLI Premium
- ASUS A8N32-SLI Deluxe (here are 2 chipset cooler required)
- ASUS M2N32 SLI Deluxe (Only for Northbridge)
- ASUS P5B Series
- ASUS P5K Series
- ASUS P5E Series SB
- ASUS P5E3 Premium SB
- ASUS Striker NB & SB
- ASUS Striker 2 Extreme & NSE SB
- ASUS Maximus Formula & Extreme SB
- ASUS Rampage / Gene SB
- ASUS P6T SB>>> new <<<
- ASUS P6T Deluxe / OC Palm & V2 SB>>> new <<<
- ASUS P6T WS Professional SB>>> new <<<

This Chipset_nbsp_COOLER is easy to integrate the existing waterloop and achieved an excellent cooling performance. The connectors are for use as Southbridge_nbsp_COOLER placed so that it exactly between the two graphics cards lost. A contact with the graphics card does not take place. On some boards it may be necessary for the cooler at 180 degrees to fit!

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The cooler has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

_nbsp_WARNING: The dismantling of the original chipset cooler leads to loss of warranty, you are therefore also in the careful reassembly of this product. No liability for damages !!!

Technical data:

Size plate: 40 x 38.5 mm
Pan Size without connectors: 49.5 x 40 x 10mm (L x W x H without connections)
Weight: ~ 117g
Bottom:_nbsp_Pure Copper 5mm
Upper plate: Brass 5mm
Connecting thread: G1/4_ez__ez_

Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

ABIT Northbridge COOLER without Fittings

_nbsp_This_nbsp_Nortbridge_nbsp_COOLER has been specially designed for the ABIT AN8 mainboard series_nbsp_and_nbsp_fits to the following ABIT boards:

- ABIT AN8
- ABIT AN8 V2.0
- ABIT AN8-V
- ABIT AN8 Ultra
- ABIT AN8 SLI
- ABIT Fatal1ty AN8
- ABIT Fatal1ty AN8 SLI
- ABIT AN8 32x SLI

If you already have a watercooling in use, we have this the ideal complement for your system. In connection with our Mosfet_nbsp_COOLER for this motherboard is now completely silent OC-operation possible.

The_nbsp_Northbridge_nbsp_COOLER is easy to integrate the existing water and achieved an excellent cooling performance. The connections are so placed that they are in SLI release between the two graphics cards lost. A contact with the graphics card does not take place.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

WARNING: The dismantling of the original chipset cooler leads to loss of warranty, you are therefore also in the careful reassembly of this product. No liability for damages!

Technical data:

Size plate: 60 x 31mm
Total size without connections: 60 x 48 x 10mm (L x W x H without connections)
Weight: ~ 133g
Bottom:_nbsp_Pure Copper_nbsp_5mm
Upper plate: Brass 5mm
Connecting thread: G1/4_ez__ez_

Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

ABIT_nbsp_AN8 32x Bridge_nbsp_COOLER without Fittings

This Bridge_nbsp_COOLER was_nbsp_specifically designed_nbsp_for the_nbsp_ABIT AN8-32X Motherboard.

If you already_nbsp_have a watercooling in_nbsp_use, we have_nbsp_the ideal complement for your system. In connection with our Mosfet and Chipset_nbsp_COOLER for this motherboard is absolutely silent OC-operation possible.

The Bridge_nbsp_COOLER is easy to integrate into the existing waterloop and achieved an excellent cooling performance.
For easy mounting, appropriate screws, nuts and_nbsp_washers are_nbsp_included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection combinations.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

WARNING: The dismantling of the original chipset cooler leads to loss of warranty, you are therefore also in the careful reassembly of this product. No liability for damages!

Technical data:

Size plate: 40 x 30mm
Total size without connections: 40 x 35 x 10mm (L x W x H without connections)
Weight: ~ 120g
Bottom:_nbsp_Pure Copper 5mm
Upper plate: Brass 5mm
Connecting thread: G1/4_ez__ez_

Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

GIGABYTE GA-K8N Series COOLER without Fittings

_nbsp_This Chipset_nbsp_COOLER is_nbsp_specifically designed_nbsp_for the_nbsp_GIGABYTE GA-KN8 Series_nbsp_and adapts to the following boards:

- GIGABYTE GA-K8N Pro-SLI
- GIGABYTE GA-K8N SLI
- GIGABYTE GA-K8NF-9
- GIGABYTE GA-K8N9 Ultra

If you already have a watercooling in_nbsp_use, we have_nbsp_the ideal complement for your system.

The Cchipset_nbsp_COOLER is easy to integrate the existing waterloop and achieved an excellent cooling performance. The connections are_nbsp_placed above the upper_nbsp_graphics if you use 2 Cards in SLI-Mode._nbsp_A touch with the graphics card does not take place.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

WARNING: The dismantling of the original chipset cooler leads to loss of warranty, you are therefore also in the careful reassembly of this product. No liability for damages!

Technical data:

Size plate: 49 x 48mm
Total size without connections: 58 x 48 x 10mm (L x W x H without connections)
Weight: ~ 170g
Bottom:_nbsp_Pure Copper 5mm
Upper plate: Brass 5mm
Connecting thread: G1/4_ez__ez_

Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

ASUS / DFI Southbridge COOLER without Fittings

This_nbsp_Southbridge_nbsp_COOLER is_nbsp_specifically designed_nbsp_for the_nbsp_following boards:

- P5N32 SLI
- P5WD2
- P5 WD2 Premium
- P5WD2-E Premium
- P5W DH Deluxe
- DFI LANparty UT n680i LT

If you already have a watercooling in_nbsp_use, we have_nbsp_the ideal complement for your system.

This_nbsp_Southbridge COOLER_nbsp_is easy to integrate the existing waterloop and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!_nbsp_

WARNING: The dismantling of the original chipset cooler leads to loss of warranty, you are therefore also in the careful reassembly of this product. No liability for damages!

Technical data:

Size plate: 39 x 39mm
Total size without connections:_nbsp_39 x_nbsp_50 x 10mm (L x W x H without connections)
Weight: ~ 140g
Bottom:_nbsp_Pure Copper 5mm
Upper plate: Brass 5mm
Connecting thread: G1/4_ez__ez_

Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

INTEL 865 / 875 Series HOOK COOLER without Fittings

This_nbsp_Chipset_nbsp_COOLER is_nbsp_specifically designed_nbsp_for those Mainboards where the original Heatsink was _ez_hooked_ez_ with 2 clips into 4 Eyelets on the Mainboard e.g. ASUS P4C-800 Mainboard._nbsp_

If you already have a watercooling in_nbsp_use, we have_nbsp_the ideal complement for your system.

The Chipset_nbsp_COOLER is easy to integrate the existing waterloop and achieved an excellent cooling performance.

For easy mounting you only need to_nbsp_overtake the original bracket,_nbsp_hook it under the Mainbord_nbsp_Eyelets thats all !!!
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!_nbsp_

WARNING: The dismantling of the original chipset cooler leads to loss of warranty, you are therefore also in the careful reassembly of this product. No liability for damages!

Technical data:

Size plate:_nbsp_53 x 40mm
Total size without connections:_nbsp_57 x_nbsp_43 x 15mm (L x W x H without connections)
Weight: ~ 170g
Bottom:_nbsp_Pure Copper 5mm
Upper plate: 2 x Brass 5mm
Connecting thread: G1/4_ez__ez_

Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

_nbsp_ABIT FATAL1TY i925XE / AW8-MAX i955X COOLER without Fittings

This_nbsp_Northbridge COOLER is specifically designed for the following boards:

- ABIT FATAL1TY i925XE
- ABIT AW8-MAX i955X

If you already have a watercooling in_nbsp_use, we have_nbsp_the ideal complement for your system.

The_nbsp_Northbridge COOLER_nbsp_is easy to integrate the existing waterloop and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The cooler has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!_nbsp_

WARNING: The dismantling of the original chipset cooler leads to loss of warranty, you are therefore also in the careful reassembly of this product. No liability for damages!

Technical data:

Size plate:_nbsp_53 x 35mm
Total size without connections:_nbsp_53 x_nbsp_35 x 10mm (L x W x H without connections)
Weight: ~ 92g
Bottom:_nbsp_Pure Copper 5mm
Upper plate:_nbsp_Brass 5mm
Connecting thread: G1/4_ez__ez_

Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

ABIT / DFI Southbridge COOLER_nbsp_without Fittings

This_nbsp_Southbridge COOLER is specifically designed for the following Mainboards:

- ABIT IX38-QuadGT
- ABIT IX48-MAX
- DFI LANPARTY UT P35 T2R
- DFI LANPARTY LT P35 T2R
- DFI Blood Iron P35 T2RL
- DFI LANPARTY UT X38 T2R
- DFI LANPARTY UT X38 T3R
- DFI LANPARTY LT X48 T2R
- DFI LANPARTY UT X48 T2R
- DFI LANparty UT X58-T3eH8
- DFI LANparty DK X58-T3eH6

If you already have a watercooling in_nbsp_use, we have_nbsp_the ideal complement for your system.

This_nbsp_Southbridge_nbsp_COOLER is easy to integrate into the existing waterloop and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

_nbsp_CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

WARNING: The dismantling of the original chipset cooler leads to loss of warranty, you are therefore also in the careful reassembly of this product. No liability for damages!

Technical data:

Size plate:_nbsp_40 x 40mm
Total size without connections:_nbsp_47 x_nbsp_50 x 10mm (L x W x H without connections)
Weight: ~ 125g
Bottom:_nbsp_Pure Copper 5mm
Upper plate:_nbsp_Brass 5mm
Connecting thread: G1/4_ez__ez_

Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

TYAN K8WE Single Chipset COOLER_nbsp_without Fittings

This_nbsp_Southbridge COOLER is specifically designed for the_nbsp_TYAN K8WE_nbsp_Mainboard. Together with our first Dualchip COOLER_nbsp_ever (Order Number MCH016) you could cool down this expressive Dual-CPU Mainboard perfectly !!!

If you already have a watercooling in_nbsp_use, we have_nbsp_the ideal complement for your system.

The_nbsp_Southbridge_nbsp_COOLER is easy to integrate into the existing waterloop and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable._nbsp_

Technical data:

Size plate:_nbsp_40 x 40mm
Total size without connections:_nbsp_48 x_nbsp_48 x 10mm (L x W x H without connections)
Weight: ~ 136g
Bottom:_nbsp_Pure Copper 5mm
Upper plate:_nbsp_Brass 5mm
Connecting thread:_nbsp_ G1/4_ez__ez_

Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

TYAN K8WE_nbsp_Dual Chipset COOLER_nbsp_without Fittings

This_nbsp_Dualchip COOLER is specifically designed for the_nbsp_TYAN K8WE_nbsp_Mainboard. Together with our_nbsp_Souhbridge COOLER_nbsp_(Order Number MCH015) you could cool down this expressive Dual-CPU Mainboard perfectly !!!

If you already have a watercooling in_nbsp_use, we have_nbsp_the ideal complement for your system.

This_nbsp_Dualchip COOLER_nbsp_is easy to integrate into the existing waterloop and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable._nbsp_

Technical data:

Size plate:_nbsp_104 x 42mm
Total size without connections:_nbsp_119 x_nbsp_66 x 10mm (L x W x H without connections)
Weight: ~ 277g
Bottom:_nbsp_Pure Copper 5mm
Upper plate:_nbsp_Brass 5mm
Connecting thread:_nbsp_ G1/4_ez__ez_

Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

ASUS P5W Series Chipset COOLER_nbsp_without Fittings

_nbsp_This_nbsp_Northbridge_nbsp_COOLER is_nbsp_specifically designed_nbsp_for the_nbsp_following ASUS Mainbooards:

- P5WD2
- P5 WD2 Premium
- P5WD2-E Premium
- P5WD G2-WS

If you already have a watercooling in_nbsp_use, we have_nbsp_the ideal complement for your system.

This Chipset_nbsp_COOLER is easy to integrate the existing waterloop and achieved an excellent cooling performance.

For easy mounting you only need to loose the hex_nbsp_screws a little,_nbsp_hook it_nbsp_under the Mainbord_nbsp_Eyelets and screw tide the hex_nbsp_screws, thats all !!!_nbsp_
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!_nbsp_

IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Size plate:_nbsp_53 x 36mm
Total size without connections:_nbsp_67 x_nbsp_52 x 10mm (L x W x H without connections)
Weight: ~ 110g
Bottom:_nbsp_Pure Copper 5mm
Upper plate: Brass 5mm
Connecting thread: G1/4_ez__ez_

Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

ASUS P5W DH_nbsp_Northbridge COOLER_nbsp_without Fittings

This_nbsp_Northbridge_nbsp_COOLER is_nbsp_specifically designed_nbsp_for the_nbsp_ASUS P5W DH Mainboard.

If you already have a watercooling in_nbsp_use, we have_nbsp_the ideal complement for your system.

This_nbsp_Northbridge COOLER_nbsp_is easy to integrate the existing waterloop and achieved an excellent cooling performance.

For easy mounting you only need to loose the outer hex_nbsp_screws a little,_nbsp_hook it_nbsp_under the Mainbord_nbsp_Eyelets and screw tide the hex_nbsp_screws, thats all !!!_nbsp_
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!_nbsp_

IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Size plate:_nbsp_38 x 38mm
Total size without connections:_nbsp_38 x_nbsp_67 x 10mm (L x W x H without connections)
Weight: ~ 107g
Bottom:_nbsp_Pure Copper 5mm
Upper plate: Brass 5mm
Connecting thread: G1/4_ez__ez_

Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

ASUS M2N32 SLI Deluxe Southbridge COOLER_nbsp_without Fittings_nbsp_

This_nbsp_Southbridge_nbsp_COOLER was developed for the ASUS M2N32 SLI Deluxe Mainboard. He has the same Layout as our Universal Chipset COOLER (Order Number: MCH003) but we put the thread holes a little more to the middle, so you could use SLI with VGA_ez_s with double height layout eg. 7950 GX2 !!!

This_nbsp_Southbridge COOLER_nbsp_is easy to integrate the existing waterloop and achieved an excellent cooling performance. The connectors are for use as Southbridge cooler placed so that it exactly between the two graphics cards lost. A contact with the graphics card does not take place. On some boards it may be necessary for the cooler at 180 degrees to fit!

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Size plate: 40 x 38.5 mm
Pan Size without connectors: 49.5 x 40 x 10mm (L x W x H without connections)
Weight: ~ 123g
Bottom:_nbsp_Pure Copper 5mm
Upper plate: Brass 5mm
Connecting thread: G1/4_ez__ez_

Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

ASUS M2N32 WS Professional Southbridge COOLER_nbsp_without Fittings_nbsp_

This_nbsp_Southbridge_nbsp_COOLER was developed for the ASUS M2N32_nbsp_WS Professional_nbsp_Mainboard.

This_nbsp_Southbridge COOLER_nbsp_is easy to integrate the existing waterloop and achieved an excellent cooling performance. The connectors are for use as Southbridge cooler placed so that it exactly between the two graphics cards lost. A contact with the graphics card does not take place._nbsp_

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Size plate: 45 x_nbsp_63 mm_nbsp_
Overall Size without connectors: 45 x_nbsp_63 x 10mm (L x W x H without connections)
Weight: ~ 175g
Bottom:_nbsp_Pure Copper 5mm
Upper plate: Brass 5mm
Connecting thread: G1/4_ez__ez_

Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

ASUS M2N32 WS Professional Dualchip COOLER_nbsp_without Fittings_nbsp_

This_nbsp_Dualchip_nbsp_COOLER was developed for the ASUS M2N32_nbsp_WS Professional_nbsp_Mainboard and covers the Northbridge and Bridge Chip.

This_nbsp_Dualchip COOLER_nbsp_is easy to integrate the existing waterloop and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Size plate:_nbsp_30 x_nbsp_74 mm_nbsp_
Overall Size without connectors:_nbsp_39 x_nbsp_85 x 10mm (L x W x H without connections)
Weight: ~ 195g
Bottom:_nbsp_Pure Copper 5mm
Upper plate: Brass 5mm
Connecting thread: G1/4_ez__ez_

Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

ABIT AW9D / AB9 / IP35_nbsp_Nortbridge COOLER_nbsp_without Fittings

This_nbsp_Northbridge COOLER is specifically designed for the following ABIT Mainboards:

_nbsp_- ABIT AW9D
- ABIT AW9D-MAX
- ABIT AB9 Quad GT
- ABIT IP35 Pro
- ABIT IP35
- ABIT IP35 E

If you already have a watercooling in_nbsp_use, we have_nbsp_the ideal complement for your system.

This_nbsp_Northbridge COOLER_nbsp_is easy to integrate into the existing waterloop and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ thread and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Size plate:_nbsp_39 x 39mm
Total size without connections:_nbsp_39 x_nbsp_43 x 10mm (L x W x H without connections)
Weight: ~ 125g
Bottom:_nbsp_Pure Copper 5mm
Upper plate:_nbsp_Brass 5mm
Connecting thread: G1/4_ez__ez_

Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

ABIT AW9D / AB9 Quad GT Southbridge COOLER_nbsp_without Fittings

This_nbsp_Southbridge COOLER is specifically designed for the following ABIT Mainboards:

- ABIT AW9D
- ABIT AW9D-MAX
- ABIT AB9 Quad GT_nbsp_

If you already have a watercooling in_nbsp_use, we have_nbsp_the ideal complement for your system.

The_nbsp_Southbridge COOLER_nbsp_is easy to integrate into the existing waterloop and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The cooler has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Size plate:_nbsp_39 x 39mm
Total size without connections:_nbsp_42 x_nbsp_42 x 10mm (L x W x H without connections)
Weight: ~ 125g
Bottom:_nbsp_Pure Copper 5mm
Upper plate:_nbsp_Brass 5mm
Connecting thread:_nbsp_G1/4_ez__ez_

Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

GIGABYTE 965 / P35 / X38 / X48 Northbridge COOLER_nbsp_without Fittings

This_nbsp_Northbridge_nbsp_COOLER was_nbsp_developed for_nbsp_several_nbsp_GIGABYTE Motherboards:

- GIGABYTE GA-965P-DQ6
- GIGABYTE GA-965P-DS4
- GIGABYTE GA-965P-DS3
- GIGABYTE GA-965G-DS3
- GIGABYTE GA-965GM-S2
- GIGABYTE GA-965P-S3
- GIGABYTE GA P35 S3
- GIGABYTE GA P35 DS3
- GIGABYTE GA P35 DS3R
- GIGABYTE GA P35 DS3P
- GIGABYTE GA P35 DS4
- GIGABYTE GA P35 DQ6
- GIGABYTE GA EP45 DS3 >> new <<
- GIGABYTE GA EP45C DS3 >> new <<
- GIGABYTE GA EP45T DS3 >> new <<
- GIGABYTE GA EP45 DS3R >> new <<
- GIGABYTE GA EP45T DS3R >> new <<
- GIGABYTE GA EP45 DS3P >> new <<
- GIGABYTE GA EP45 DS3L >> new <<
- GIGABYTE GA EP45 DS4 >> new <<
- GIGABYTE GA EP45 DS5 >> new <<
- GIGABYTE GA X38 DS5
- GIGABYTE GA X38 DQ6
- GIGABYTE GA EX38 DS5
- GIGABYTE GA EX38 DQ6
- GIGABYTE GA X48 DS4 >> new <<
- GIGABYTE GA X48 DS5 >> new <<
- GIGABYTE GA X48 DQ6

This_nbsp_Northbridge_nbsp_COOLER is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The cooler has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Size plate: 40 x 40 mm
Total size without connections:_nbsp_58 x_nbsp_39 x 10 mm (L x W x H without connections)
Weight: ~ 107g
Bottom:_nbsp_Pure Copper_nbsp_5mm_nbsp_
Cover plate:_nbsp_Brass_nbsp_5mm
Connecting thread: G1/4_ez__ez_

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

GIGABYTE 965 / P35 / X38 / X48 Southbridge COOLER_nbsp_without Fittings

This_nbsp_Southbridge_nbsp_COOLER was_nbsp_developed for_nbsp_several_nbsp_GIGABYTE Motherboards:

- GIGABYTE GA-965P-DQ6
- GIGABYTE GA-965P-DS4
- GIGABYTE GA-965P-DS3
- GIGABYTE GA-965G-DS3
- GIGABYTE GA-965GM-S2
- GIGABYTE GA-965P-S3
- GIGABYTE GA P35 S3
- GIGABYTE GA P35 DS3
- GIGABYTE GA P35 DS3R
- GIGABYTE GA P35 DS3P
- GIGABYTE GA P35 DS4
- GIGABYTE GA P35 DQ6
- GIGABYTE GA X38 DS5
- GIGABYTE GA X38 DQ6
- GIGABYTE GA EX38 DS5
- GIGABYTE GA EX38 DQ6
- GIGABYTE GA X48 DS4 >> new <<
- GIGABYTE GA X48 DS5 >> new <<
- GIGABYTE GA X48 DS5
- GIGABYTE GA X48 DQ6

This_nbsp_Southbridge_nbsp_COOLER is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Size plate:_nbsp_38 x_nbsp_38 mm
Total size without connections:_nbsp_40,5 x_nbsp_40.5 x 10 mm (L x W x H without connections)
Weight: ~ 107g
Bottom:_nbsp_Pure Copper_nbsp_5mm_nbsp_
Cover plate:_nbsp_Brass_nbsp_5mm
Connecting thread: G1/4_ez__ez_

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

NVIDIA 680i / 790i Southbridge COOLER_nbsp_without Fittings

This_nbsp_Southbridge_nbsp_COOLER was_nbsp_developed for_nbsp_several_nbsp_NVIDIA reference_nbsp_Motherboards:

- BFG nForce 680i SLI
- EVGA nForce 680i SLI
- EVGA nForce 680i LT SLI
- MSI P6N, nForce 680i SLI
- XFX nForce 680i SLI
- XFX nForce 680i LT SLI
- EVGA nForce 790i Ultra
- XFX N790, nForce 790i Ultra

This_nbsp_Southbridge_nbsp_COOLER is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The cooler has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Size plate:_nbsp_39 x_nbsp_39 mm
Total size without connections:_nbsp_65 x_nbsp_39 x_nbsp_15 mm (L x W x H without connections)
Weight: ~ 178g
Bottom:_nbsp_Pure Copper_nbsp_5mm_nbsp_
Cover plate:_nbsp_Brass_nbsp_2 x 5mm_nbsp_
Connecting thread: G1/4_ez__ez_

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

NVIDIA 680i / 790i Northbridge COOLER_nbsp_without Fittings

This_nbsp_Northbridge_nbsp_COOLER was_nbsp_developed for_nbsp_several_nbsp_NVIDIA reference_nbsp_Motherboards:

- BFG nForce 680i SLI
- EVGA nForce 680i SLI
- EVGA nForce 680i LT SLI
- MSI P6N, nForce 680i SLI
- XFX nForce 680i SLI
- XFX nForce 680i LT SLI
- EVGA nForce 790i Ultra
- XFX N790, nForce 790i Ultra

This_nbsp_Northbridge_nbsp_COOLER is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The cooler has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Size plate:_nbsp_38 x_nbsp_38 mm
Total size without connections:_nbsp_38 x_nbsp_38 x_nbsp_10 mm (L x W x H without connections)
Weight: ~ 113g
Bottom:_nbsp_Pure Copper_nbsp_5mm_nbsp_
Cover plate:_nbsp_Brass_nbsp_5mm_nbsp_
Connecting thread: G1/4_ez__ez_

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

ABIT IN9 32X MAX Northbridge COOLER_nbsp_without Fittings

This_nbsp_Northbridge COOLER is specifically designed for the_nbsp_ABIT IN9 32X MAX_nbsp_Mainboard.

If you already have a watercooling in_nbsp_use, we have_nbsp_the ideal complement for your system.

The_nbsp_Northbridge COOLER_nbsp_is easy to integrate into the existing waterloop and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The cooler has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Size plate:_nbsp_39 x 39mm
Total size without connections:_nbsp_39 x_nbsp_43 x 10mm (L x W x H without connections)
Weight: ~ 125g
Bottom:_nbsp_Pure Copper 5mm
Upper plate:_nbsp_Brass 5mm
Connecting thread: G1/4_ez__ez_

Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

ABIT IN9 32X MAX Southbridge COOLER_nbsp_without Fittings

This_nbsp_Southbridge COOLER is specifically designed for the_nbsp_ABIT IN9 32X MAX_nbsp_Mainboard.

If you already have a watercooling in_nbsp_use, we have_nbsp_the ideal complement for your system.

The_nbsp_Southbridge COOLER_nbsp_is easy to integrate into the existing waterloop and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Total size without connections:_nbsp_54 x_nbsp_43 x 10mm (L x W x H without connections)
Weight: ~ 155g
Bottom:_nbsp_Pure Copper 5mm
Upper plate:_nbsp_Brass 5mm
Connecting thread: G1/4_ez__ez_

Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

DFI LANparty UT n680i LT Northbridge COOLER_nbsp_without Fittings

This_nbsp_Northbridge COOLER is specifically designed for the_nbsp_DFI LANparty UT n680i LT Mainboard.

If you already have a watercooling in_nbsp_use, we have_nbsp_the ideal complement for your system.

The_nbsp_Northbridge COOLER_nbsp_is easy to integrate into the existing waterloop and achieved an excellent cooling performance.

For easy mounting you only need to loose the outer hex screws a little, hook it under the Mainbord_nbsp_Eyelets and screw tide the hex screws, thats all !!!
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Total size without connections:_nbsp_54 x_nbsp_43 x 10mm (L x W x H without connections)
Weight: ~ 145g
Bottom:_nbsp_Pure Copper 5mm
Upper plate:_nbsp_Brass 5mm
Connecting thread: G1/4_ez__ez_

Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

ABIT IP35 Series Southbridge COOLER_nbsp_without Fittings

This_nbsp_Southbridge COOLER is specifically designed for the following ABIT Mainboards:

- ABIT IP35 Pro
- ABIT IP35
- ABIT IP35 E_nbsp_

If you already have a watercooling in_nbsp_use, we have_nbsp_the ideal complement for your system.

The_nbsp_Southbridge COOLER_nbsp_is easy to integrate into the existing waterloop and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Size plate:_nbsp_39 x 39mm
Total size without connections:_nbsp_42 x_nbsp_42 x 10mm (L x W x H without connections)
Weight: ~ 125g
Bottom:_nbsp_Pure Copper 5mm
Upper plate:_nbsp_Brass 5mm
Connecting thread:_nbsp_G1/4_ez__ez_

Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

DFI LANparty P35 / X38 / X48 / X58 Northbridge COOLER_nbsp_without Fittings

This_nbsp_Northbridge_nbsp_COOLER was_nbsp_developed for_nbsp_several_nbsp_DFI_nbsp_Motherboards:

- DFI LANPARTY UT P35 T2R
- DFI LANPARTY LT P35 T2R
- DFI LANPARTY DK P35 T2RS
- DFI Blood Iron P35 T2RL
- DFI LANPARTY UT X38 T2R
- DFI LANPARTY UT X38 T3R
- DFI LANPARTY LT X48 T2R
- DFI LANPARTY UT X48 T2R
- DFI LANparty UT X58-T3eH8
- DFI LANparty DK X58-T3eH6

This_nbsp_Northbridge_nbsp_COOLER is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The cooler has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Size plate:_nbsp_38 x_nbsp_38 mm
Total size without connections:_nbsp_40 x_nbsp_40 x_nbsp_10 mm (L x W x H without connections)
Weight: ~ 135g
Bottom:_nbsp_Pure Copper_nbsp_5mm_nbsp_
Cover plate:_nbsp_Brass_nbsp_5mm_nbsp_
Connecting thread: G1/4_ez__ez_

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

ASUS Maximus / Striker 2 Extreme / P5E3 Northbridge COOLER_nbsp_without Fittings

This_nbsp_Northbridge_nbsp_COOLER was_nbsp_developed for_nbsp_several_nbsp_ASUS_nbsp_Motherboards:

- ASUS Maximus Formula Special Edition X38 DDR2
- ASUS Maximus Formula X38 DDR2
- ASUS Rampage Formula
- ASUS P5E X38 DDR2
- ASUS Maximus Extreme X38 DDR3
- ASUS Striker 2 Extreme 790i Ultra
- ASUS Striker 2 NSE, 790i SLI

This_nbsp_Northbridge_nbsp_COOLER is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Size plate:_nbsp_60 x_nbsp_45 mm
Total size without connections:_nbsp_60 x_nbsp_45 x_nbsp_10 mm (L x W x H without connections)
Weight: ~ 142g
Bottom:_nbsp_Pure Copper_nbsp_5mm_nbsp_
Cover plate:_nbsp_Brass_nbsp_5mm_nbsp_
Connecting thread: G1/4_ez__ez_

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

ABIT IX38-QuadGT / IX48-MAX Northbridge COOLER_nbsp_without Fittings

This_nbsp_Northbridge COOLER is specifically designed for the following_nbsp_ABIT_nbsp_Mainboards:

_nbsp_- ABIT IX38-QuadGT
- ABIT IX48-MAX

If you already have a watercooling in_nbsp_use, we have_nbsp_the ideal complement for your system.

The_nbsp_Northbridge COOLER_nbsp_is easy to integrate into the existing waterloop and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Size plate:_nbsp_39 x 39mm
Total size without connections:_nbsp_39 x_nbsp_82 x 10mm (L x W x H without connections)
Weight: ~ 135g
Bottom:_nbsp_Pure Copper 5mm
Upper plate:_nbsp_Brass 5mm
Connecting thread: G1/4_ez__ez_

Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

NVIDIA 780i Northbridge COOLER_nbsp_without Fittings

This_nbsp_Northbridge_nbsp_COOLER was_nbsp_developed for_nbsp_several_nbsp_NVIDIA Reference_nbsp_Motherboards:

- EVGA nForce 780i SLI
- XFX nForce 780i SLI

This_nbsp_Northbridge_nbsp_COOLER is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The cooler has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Total size without connections:_nbsp_77 x_nbsp_45 x_nbsp_10 mm (L x W x H without connections)
Weight: ~ 150g
Bottom:_nbsp_Pure Copper_nbsp_5mm_nbsp_
Cover plate:_nbsp_Brass_nbsp_5mm_nbsp_
Connecting thread: G1/4_ez__ez_

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

NVIDIA 780i / 790i Southbridge_nbsp_/ Foxconn Blackops Northbridge_nbsp_COOLER_nbsp_without Fittings

This Chipset_nbsp_COOLER was_nbsp_developed for_nbsp_several_nbsp_NVIDIA Reference_nbsp_Motherboards:

- EVGA nForce 780i SLI Southbridge
- EVGA nForce 780i SLI FTW Southbridge
- XFX nForce 780i SLI Southbridge
- EVGA nForce 790i Ultra SLI Southbridge
- EVGA nForce 790i SLI FTW Southbridge
- EVGA nForce 790i SLI FTW Digital Southbridge
- XFX nForce 790i Ultra Southbridge

- fits also on Foxconn Blackops X48 Northbridge !!!

This_nbsp_Chipset COOLER_nbsp_is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Total size without connections:_nbsp_56 x_nbsp_39 x_nbsp_10 mm (L x W x H without connections)
Weight: ~ 110g
Bottom:_nbsp_Pure Copper_nbsp_5mm_nbsp_
Cover plate:_nbsp_Brass_nbsp_5mm_nbsp_
Connecting thread: G1/4_ez__ez_

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

ASUS Striker 2 Formula / Rampage Extreme / Maximus 2 Formula Northbrige COOLER_nbsp_without Fittings

This_nbsp_Northbridge_nbsp_COOLER was_nbsp_developed for_nbsp_several_nbsp_ASUS_nbsp_Motherboards:

- ASUS Striker 2 Formula
- ASUS Rampage Extreme X48
- ASUS Maximus II Formula

This_nbsp_Northbridge_nbsp_COOLER is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Total size without connections:_nbsp_60 x_nbsp_45 x_nbsp_10 mm (L x W x H without connections)
Weight: ~ 145g
Bottom:_nbsp_Pure Copper_nbsp_5mm_nbsp_
Cover plate:_nbsp_Brass_nbsp_5mm_nbsp_
Connecting thread: G1/4_ez__ez_

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

ASUS Striker 2_nbsp_Dualchip COOLER_nbsp_without Fittings

This_nbsp_Dualchip_nbsp_COOLER was_nbsp_developed for_nbsp_the_nbsp_ASUS Striker 2 Formula_nbsp_Motherboard.

This_nbsp_Dualchip COOLER is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Total size without connections:_nbsp_96 x_nbsp_58 x_nbsp_10 mm (L x W x H without connections)
Weight: ~ 175g
Bottom:_nbsp_Pure Copper_nbsp_5mm_nbsp_
Cover plate:_nbsp_Brass_nbsp_5mm_nbsp_
Connecting thread: G1/4_ez__ez_

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

NVIDIA 780i / 790i Southbridge_nbsp_/ Foxconn Blackops Northbridge_nbsp_COOLER_nbsp_without Fittings

This_nbsp_Southbridge COOLER_nbsp_was_nbsp_developed for_nbsp_the Foxconn Blackops X48_nbsp_Motherboard.

This_nbsp_Southbridge_nbsp_COOLER is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Total size without connections:_nbsp_41 x_nbsp_41 x_nbsp_10 mm (L x W x H without connections)
Weight: ~ 130g
Bottom:_nbsp_Pure Copper_nbsp_5mm_nbsp_
Cover plate:_nbsp_Brass_nbsp_5mm_nbsp_
Connecting thread: G1/4_ez__ez_

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

ASUS P5E Series / P6T Series Northbrige COOLER_nbsp_without Fittings

This_nbsp_Northbridge_nbsp_COOLER was_nbsp_developed for_nbsp_several_nbsp_ASUS_nbsp_Motherboards:

- ASUS P5E64 WS Evolution X48
- ASUS P5E WS Pro X38
- ASUS P5E3 WS Pro X38
- ASUS P5E3 X38
- ASUS P5E64 WS Pro X38
- ASUS P6T6 WS Revolution >>> new <<<
- ASUS P6T WS Professional >>> new <<<

This_nbsp_Northbridge_nbsp_COOLER is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Total size without connections:_nbsp_60 x_nbsp_45 x_nbsp_10 mm (L x W x H without connections)
Weight: ~ 135g
Bottom:_nbsp_Pure Copper_nbsp_5mm_nbsp_
Cover plate:_nbsp_Brass_nbsp_5mm_nbsp_
Connecting thread: G1/4_ez__ez_

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

GIGABYTE X48T-DQ6 Northbridge COOLER_nbsp_without Fittings

This_nbsp_Northbridge_nbsp_COOLER was_nbsp_especiality developed for_nbsp_the_nbsp_GIGABYTE_nbsp_ X48T-DQ6 Motherboard:

This_nbsp_Northbridge_nbsp_COOLER is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Size plate: 40 x_nbsp_39 mm
Total size without connections:_nbsp_75 x_nbsp_39 x 10 mm (L x W x H without connections)
Weight: ~ 127g
Bottom:_nbsp_Pure Copper_nbsp_5mm_nbsp_
Cover plate:_nbsp_Brass_nbsp_5mm
Connecting thread: G1/4_ez__ez_

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

GIGABYTE EP45 Series Southbridge COOLER_nbsp_without Fittings

This_nbsp_Southbridge_nbsp_COOLER was_nbsp_developed for_nbsp_several_nbsp_GIGABYTE Motherboards:

- GIGABYTE GA-EP45-UD3
- GIGABYTE GA-EP45-UD3P
- GIGABYTE GA-EP45-UD3R
- GIGABYTE GA-EP45T-UD3
- GIGABYTE GA-EP45T-UD3P
- GIGABYTE GA-EP45T-UD3R
- GIGABYTE GA EP45 DS3
- GIGABYTE GA EP45C DS3
- GIGABYTE GA EP45T DS3
- GIGABYTE GA EP45 DS3R
- GIGABYTE GA EP45T DS3R
- GIGABYTE GA EP45 DS3P
- GIGABYTE GA EP45 DS3L
- GIGABYTE GA EP45 DS4
- GIGABYTE GA EP45 DS5

This_nbsp_Southbridge_nbsp_COOLER is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Size plate:_nbsp_38 x_nbsp_38 mm
Total size without connections:_nbsp_40,5 x_nbsp_40.5 x 10 mm (L x W x H without connections)
Weight: ~ 137g
Bottom:_nbsp_Pure Copper_nbsp_5mm_nbsp_
Cover plate:_nbsp_Brass_nbsp_5mm
Connecting thread: G1/4_ez__ez_

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

GIGABYTE EP45 UD3 Series Northbridge COOLER without Fittings

This_nbsp_Northbridge_nbsp_COOLER was_nbsp_developed for_nbsp_several_nbsp_GIGABYTE Motherboards:

- GIGABYTE GA-EP45-UD3
- GIGABYTE GA-EP45-UD3P
- GIGABYTE GA-EP45-UD3R
- GIGABYTE GA-EP45T-UD3
- GIGABYTE GA-EP45T-UD3P
- GIGABYTE GA-EP45T-UD3R

This_nbsp_Northbridge_nbsp_COOLER is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Size plate:_nbsp_39 x 41 mm
Total size without connections:_nbsp_39 x_nbsp_41 x 10 mm (L x W x H without connections)
Weight: ~ 127g
Bottom:_nbsp_Pure Copper_nbsp_5mm_nbsp_
Cover plate:_nbsp_Brass_nbsp_5mm
Connecting thread: G1/4_ez__ez_

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

ASUS Rampage 2 Extreme Southbridge COOLER_nbsp_without Fittings

This_nbsp_Southbridge_nbsp_COOLER was_nbsp_developed for_nbsp_the_nbsp_ASUS_nbsp_Rampage 2 Extreme_nbsp_Motherboard.

This_nbsp_Southbridge_nbsp_COOLER is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Total size without connections:_nbsp_60 x_nbsp_45 x_nbsp_10 mm (L x W x H without connections)
Weight: ~ 155g
Bottom:_nbsp_Pure Copper_nbsp_5mm_nbsp_
Cover plate:_nbsp_Brass_nbsp_5mm_nbsp_
Connecting thread: G1/4_ez__ez_

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

ASUS Rampage 2 Extreme Northbridge COOLER_nbsp_without Fittings

This_nbsp_Northbridge_nbsp_COOLER was_nbsp_developed for_nbsp_the_nbsp_ASUS_nbsp_Rampage 2 Extreme_nbsp_Motherboard.

This_nbsp_Northbridge_nbsp_COOLER is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Total size without connections:_nbsp_60 x_nbsp_45 x_nbsp_10 mm (L x W x H without connections)
Weight: ~ 155g
Bottom:_nbsp_Pure Copper_nbsp_5mm_nbsp_
Cover plate:_nbsp_Brass_nbsp_5mm_nbsp_
Connecting thread: G1/4_ez__ez_

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

ASUS P6T Deluxe / OC Palm Northbridge COOLER_nbsp_without Fittings

This_nbsp_Northbridge_nbsp_COOLER was_nbsp_developed for_nbsp_the_nbsp_following ASUS_nbsp_Motherboards:

- ASUS P6T Deluxe
- ASUS P6T Deluxe V2
- ASUS P6T Deluxe / OC Palm

This_nbsp_Northbridge_nbsp_COOLER is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Total size without connections:_nbsp_65 x_nbsp_39 x_nbsp_10 mm (L x W x H without connections)
Weight: ~ 140g
Bottom:_nbsp_Pure Copper_nbsp_5mm_nbsp_
Cover plate:_nbsp_Brass_nbsp_5mm_nbsp_
Connecting thread: G1/4_ez__ez_

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

XFX X58i Southbridge COOLER_nbsp_without Fittings

This_nbsp_Southbridge_nbsp_COOLER was_nbsp_developed for_nbsp_the_nbsp_XFX X58i_nbsp_Motherboard.

This_nbsp_Southbridge_nbsp_COOLER is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Total size without connections:_nbsp_48 x_nbsp_33 x_nbsp_10 mm (L x W x H without connections)
Weight: ~ 140g
Bottom:_nbsp_Pure Copper_nbsp_5mm_nbsp_
Cover plate:_nbsp_Brass_nbsp_5mm_nbsp_
Connecting thread: G1/4_ez__ez_

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

XFX X58i Northbridge COOLER_nbsp_without Fittings

This_nbsp_Northbridge_nbsp_COOLER was_nbsp_developed for_nbsp_the_nbsp_XFX X58i_nbsp_Motherboard.

This_nbsp_Norhbridge_nbsp_COOLER is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Total size without connections:_nbsp_58 x_nbsp_40 x_nbsp_10 mm (L x W x H without connections)
Weight: ~ 145g
Bottom:_nbsp_Pure Copper_nbsp_5mm_nbsp_
Cover plate:_nbsp_Brass_nbsp_5mm_nbsp_
Connecting thread: G1/4_ez__ez_

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

ASUS_nbsp_Gene Series_nbsp_Northbrige COOLER_nbsp_without Fittings

This_nbsp_Northbridge_nbsp_COOLER was_nbsp_developed for_nbsp_the_nbsp_ASUS_nbsp_Gene Series Motherboards:

- ASUS Rampage 2 GENE
- ASUS Maximus 2 GENE

This_nbsp_Northbridge_nbsp_COOLER is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Total size without connections:_nbsp_60 x_nbsp_45 x_nbsp_10 mm (L x W x H without connections)
Weight: ~ 140g
Bottom:_nbsp_Pure Copper_nbsp_5mm_nbsp_
Cover plate:_nbsp_Brass_nbsp_5mm_nbsp_
Connecting thread: G1/4_ez__ez_

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

DFI DK Series_nbsp_Southbridge COOLER_nbsp_without Fittings

This_nbsp_Southbridge COOLER is specifically designed for the following DFI DK Series Mainboards:

_nbsp_- DFI LANPARTY BI P45-T2RS

- DFI LANPARTY DK P35-T2
- DFI LANPARTY DK P35-T2RS
- DFI LANPARTY DK P45-T2RS
- DFI LANPARTY DK P45-T2RS / Turbo
- DFI LANPARTY DK P45-T2RS Elite
- DFI LANPARTY DK P45-T2RS PLUS
- DFI LANPARTY DK P45-T3RSB PLUS

- DFI LANPARTY JR P45-T2RS

If you already have a watercooling in_nbsp_use, we have_nbsp_the ideal complement for your system.

This_nbsp_Southbridge_nbsp_COOLER is easy to integrate into the existing waterloop and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

_nbsp_CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

WARNING: The dismantling of the original chipset cooler leads to loss of warranty, you are therefore also in the careful reassembly of this product. No liability for damages!

Technical data:

Size plate:_nbsp_40 x 40mm
Total size without connections:_nbsp_40 x_nbsp_40 x 10mm (L x W x H without connections)
Weight: ~ 135g
Bottom:_nbsp_Pure Copper 5mm
Upper plate:_nbsp_Brass 5mm
Connecting thread: G1/4_ez__ez_

Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH

ASUS_nbsp_M4A79 Series Northbrige COOLER_nbsp_without Fittings

This_nbsp_Northbridge_nbsp_COOLER was_nbsp_developed for_nbsp_the following_nbsp_ASUS_nbsp_Motherboards:

- ASUS M4A79 Deluxe DDR2
- ASUS M4A79T Deluxe DDR3

This_nbsp_Northbridge_nbsp_COOLER is easy to integrate the existing watercooling loop_nbsp_and achieved an excellent cooling performance.

For easy mounting, appropriate screws, nuts and_nbsp_washers included.
The_nbsp_COOLER has G1/4_ez__ez_ threads and can be used with all possible connection types are combined.

CAUTION: The included spacers are only needed if the thread length of your fittings is more then 5mm !!!

_nbsp_IMPORTANT: The deinstallation of the stock chipset cooler may void your warranty, please work accordingly careful when mounting this product. We are not responsible for any damages resulting from or during_nbsp_ installation of this product and will not be liable.

Technical data:

Total size without connections:_nbsp_60 x_nbsp_40 x_nbsp_10 mm (L x W x H without connections)
Weight: ~ 155g
Bottom:_nbsp_Pure Copper_nbsp_5mm_nbsp_
Cover plate:_nbsp_Brass_nbsp_5mm_nbsp_
Connecting thread: G1/4_ez__ez_

_nbsp_Our COOLERs are always delivered without fittings !!!

Manufacturer: MIPS Computer GmbH